Print Line Operator- Aramid; 3rd Shift

Print Line Operator
- Aramid (3rd Shift)

500A - ZEELAND, MI 49464

Position Type:
Full Time

Job Shift: 3rd shift
Category:
Manufacturing

As a Print Line Operator you are going to setup and run Print Line to produce blocks that meet customer and company specifications.

Currently there is an opening for a Print Line Operator in our Aramid division on 3rd shift (10:30p - 6:30a. Sunday - Thursday)

*** Training will be required on 1st shift for 4 to 6 weeks:
Monday - Friday 6:30AM to 2:30PM

Aramid Print Line Operator
:
Starting at $22.98 per hour on 3rd Shift.

• Startup/verify secondary equipment (oxidizer, hot oil heater) is operating at required set points.
• Check schedule to determine next order to process.
• Read work order instructions and process specifications.
• Transfer coils of material with a forklift.
• Use the overhead crane to load/unload coils and cylinders.
• Set up and run Print Line according to process specifications.
• Perform required tests (adhesive weight, viscosity, percent solids) to verify proper line setup.
• Maintain proper adhesive levels, oven temperatures and material tension according to process set points.
• Clean print cylinders and adhesive tray utilizing chemicals and small hand tools.
• Inspect material for quality issues.
• Move completed coils on a roller cart to next operation.
• Complete associated paperwork.
• Enter process and work order information into computer system to maintain accurate records.
• Monitor equipment and make setup adjustments as necessary.
• Communicate with management representatives regarding any material or equipment concerns.
• Record production and scrap information on team board charts.
• Maintain an inventory of supplies. Notify supervisor when re-order level is reached.
• Assist in performing quarterly inventory checks.
• Assist other departments as necessary.
• Provide the customer with the best value including Cost, Quality, and Delivery by being efficient, productive, and careful.
• Actively participate in improving our product, processes, equipment and methods.
• Maintain a clean and safe work environment at all times including waste/scrap removal and cleanup of equipment.
• Perform all reasonably related duties as assigned.

• High school diploma or GED Preferred
• Strong attention to detail
• Mechanically inclined
• Ability to work overtime.

• Must be eligible to work on programs subject to ITAR (International Traffic in Arms Regulations).

Consistent with the Americans with Disabilities Act (ADA), it is the policy of Plascore to provide reasonable accommodation when requested by a qualified applicant or employee with a disability, unless such accommodation would cause an undue hardship. The policy regarding requests for reasonable accommodation applies to all aspects of employment, including the application process. If reasonable accommodation is needed, please contact the Talent Acquisition team at

Plascore is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, genetic information, veteran status, disability or other legally protected characteristic.