More jobs:
Machine Operator/Packer/Welder-1st Shift WorkWeek
Job in
Zanesville, Muskingum County, Ohio, 43701, USA
Listed on 2026-01-12
Listing for:
Amesbury Group
Full Time
position Listed on 2026-01-12
Job specializations:
-
Manufacturing / Production
Manufacturing Production
Job Description & How to Apply Below
To perform the following duties in the Steel Operations Department: form steel parts for basement door header, door leaves, and side pieces; weld components; hang components onto paint line; pack components.
Starting rate $20.00/hour
Quarterly Production Incentive Program
Essential Duties & Responsibilities
Welder
- Move door or leaf onto table. Use pressure table to properly position clips, or hold part in position by hand.
- Weld part to secure it, making sure that it is straight and correctly placed, using standard welding practice.
- Move completed component to designated space. Move door parts weighing approximately 60# five feet to the table, then four feet to material storage area.
- Perform duties to measure, cut and shear materials for welding and assembly by others.
- Move material weighing approximately 50# 20 feet onto the machine which is 3 feet high. Using proper methods, form, punch, cope or saw material as necessary.
- Hang and Pack:
Move basement door parts from storage area, then lift them onto the hangers of the conveyer going into the paint booth, keeping up with the speed of the conveyer. - Remove basement doors parts from the paint booth hangers and move them to the packing area, keeping up with the speed of the conveyer. Properly align parts in the wrapper, pick up and insert spacers, attach band to the package, and move finished package onto a pallet.
- Move basement door parts weighing up to 60# approximately four feet, and lift them 3 feet high to attach them to the paint booth conveyer. Lift these same parts off of the conveyer and move them 10 feet to the packing area, then move completed package weighing 200#, three feet to a pallet.
- Actively participate in "5S" procedures as well as all Continuous Improvement efforts
- Perform any and all other duties as assigned by Supervisor or Manager.
- Knowledge of math, with the ability to add and subtract whole numbers.
- Ability to work as a team with another operators.
- Ability to follow instructions.
- Use of fixed gauges, direct reading instruments and similar devices; where interpretation is not required.
- Ability to operate MIG welding gun, banding machine, crane and saw.
- Ability to use measuring tape, square, hammer, chisel, wire cutters, ruler, staple gun and other power and hand tools.
- Any combination equivalent to High School diploma or equivalent.
- Prior production experience preferred.
- Follow all safety rules and regulations. Wear all proper PPE as assigned or warranted in the work area.
- Ability to safely move around the plant floor.
- Ability to properly maintain all assigned equipment.
- Ability to meet productivity standards for the position.
- Meet quality control standards.
- Keep work area clean and neat.
- Meet attendance and punctuality requirements.
To View & Apply for jobs on this site that accept applications from your location or country, tap the button below to make a Search.
(If this job is in fact in your jurisdiction, then you may be using a Proxy or VPN to access this site, and to progress further, you should change your connectivity to another mobile device or PC).
(If this job is in fact in your jurisdiction, then you may be using a Proxy or VPN to access this site, and to progress further, you should change your connectivity to another mobile device or PC).
Search for further Jobs Here:
×