Electricians Industrial & Panel Wirers

Overview

Electricians - Industrial & Electrical Panel Wiring & Electrical Testing Techs

Working in factories mainly on industrial type work, on the installation of electrical cable tray, ladder racking and electrical cables. Connecting electrical cables to panels & wiring electrical control panel and other electrical systems from electrical engineering drawings. Checking work & testing work. Working from IPAF or MEWP Scissor Lift/Cherry Picker.

• Install electrical cable tray, ladder racking and electrical cables in industrial settings.
• Connect electrical cables to panels and wire electrical control panels and other electrical systems per electrical engineering drawings.
• Check and test work to verify proper operation.
• Work from IPAF or MEWP Scissor Lift / Cherry Picker as required.

• C&G or NVQ 3 17th Ed ideally 18th Ed & 2391 Electrical Engineering.
• Must have current CSCS or ECS Card.
• IPAF or MEWP Card, Harness Training & Working at Heights Certifications.

Normally working 07:00 to 19:00, Mon to Fri, and Sat & Sun if required.

2 to 4+ weeks plus other phase of work on this site and on other local sites such as Wrexham Site or Ellmsmere Port Site, with work running from 2 to 12+ weeks subject to attendance, performance and workload. The aim of the company, if possible, is to keep the same reliable workers on ongoing work on sites in local areas and sites within 20 to 50 minutes travel time.

Fulcrum Engineering are acting as an Employment Business on behalf of our Client.