Wheel Inspector

MAJOR ACTIVITIES

• Perform visual, ultrasonic and magnetic particle inspection of wheels for conformance to applicable standards and specifications.
• Have sufficient knowledge of ultrasonics to work with defect code.
• Must receive Level I certification in magnetic particle and ultrasonic inspection as provided by the American Society for Non-Destructive Testing and required by AAR within eighteen month on the job.
• Properly mark wheels indicating defects with crayon.
• Record pertinent data on form related to wheel inspection.
• Perform periodic inspection on final line, visually checking stamping for readability and proper depth, chamfering, stenciling, bores, hubs, plates and pads. Check flange thickness and height by use of a flange gauge.
• Check overall appearance of wheel to make certain that it has been cleaned properly.
• Set up, change, or adjust equipment as necessary to assure correct inspection of wheels.
• Input information into computer to update inventories.
• Advise supervisor immediately when defects become excessive.

• Mix magnetic particle solution in holding tank and clean weekly.
• Occasionally assist in lab to become familiar with operation.
• May assist in breakdowns to resume production.
• Take wheel samples for analysis as necessary.
• Keep needed supplies in stock.
• Maintain inspection booth in clean and orderly fashion.
• Check tape lines on master tape line for accuracy when working final line.
• Check weight of wheels and keep record of weight, bore size and type when working finalline
• Perform other duties as required.