Maintenance - Mech​/Elec

Job Description Summary

2nd Shift

Maintenance A – Mechanical & Electrical perform a wide variety of complicated maintenance work, involving setup, installation, alteration, repair or rearrangement of machines, facilities, or equipment and their related controls. Will work a substantial portion of the time in the electric and mechanical skill or trade. Will be required to perform maintenance work other than own specialty.

This position is for 2nd shift. Working hours are 3PM – 11PM. Overtime may be necessary at times to support business need.

The starting pay for this position will be $36.04/hour progressing to $40.75/hour after 6 months of satisfactory performance. While working the off-shift, you will receive an additional night-shift adder of $1, this transitions to 10% after 5 years of service. This role is eligible for an additional $2 an hour for working in our ACA.

• Responsible for setting up, maintaining, altering, installing, repairing or rearranging complex equipment or machines and their related controls. Will diagnose equipment malfunctions and perform corrections with minimum of supervision.
• Required to tear down, overhaul, and reassemble intricate mechanisms, machines, apparatus, etc. involving complex mechanical, electrical, hydraulic, pneumatic and lubricating systems.
• Responsible for providing mechanical or electrical service on various types of machines or equipment.
• Required to service and repair various systems and components for chemical or caustic equipment such as tanks, piping, sumps, etc.
• Responsible for performing repair or preventative maintenance on a variety of equipment
• For controlled area assignments, must be able to successfully pass the Nuclear Safety Training Test, must wear protective clothing, and follow strict radiation protection, criticality, and industrial safety regulations. Must be medically and mentally capable of wearing appropriate respiratory equipment. Must pass all required IROFS testing elements.
• Required to work with 480 voltage and below. This includes the changing of motors, contractors, overloads, motor starters, relays, 277v lighting and more.
• Installs, repairs or services such facility or production systems and their related controls as water, sanitary, generators, compressors, chemicals, compressed air, gas, steam, plumbing, and waste treatment.
• Responsible for performing or adjusting of the above machines or equipment, and performing work outside his specialty under the direction of supervision or higher rated personnel.
• Required to operate machines and equipment to check the work performed and demonstrate satisfactory operating condition. Required to co-ordinate re-start of equipment with knowledgeable, trained operators to insure satisfactory operation after repairs.
• Responsible for operating various types of moving equipment used in installation and repair work, such as fork lift trucks, platform lift trucks, mobile crane, hoists, etc.
• Must be able to perform other maintenance services besides own specialty.
• Performs duties and tasks conforming to all safety regulations and procedures. Keeps facilities, materials and work areas clean and orderly, exercising good housekeeping practices.
• Responsible for operating and maintaining equipment under specific plant permits and other regulations such as NPDES, DWQ, NRC, Etc. Activities would include correct documentation and follow up to insure compliance.
• Required to use a shop work order system, including logging time, entering failure notes and any pertinent information into the work order comments.
• Must be able to work with minimal supervision and make independent sound process judgments.
• Responsible for continuous adherence to all areas of industrial, radiation, and criticality safety regulations and requirements.
• Interact with team leaders, maintenance coordinators, production advisors and other personnel to ensure setup and maintenance activities are consistent with production priorities. Assists operators in troubleshooting process equipment issues.
• Required to read and interpret technical prints and/or effectively understand and follow oral instructions.
• Other…