Quality Inspector

Quality Control Inspector is responsible for a wide range of inspection functions supporting assembly and/or machining operations. Follow programs, documents, drawings, specifications, MRB, CMM and quality standards to perform inspection functions.

EXPERIENCE:

• Minimum of 5 years’ experience in an aerospace/aircraft

• Minimum 3 years Quality Inspection aerospace/aircraft

• GD&T Tolerance

• Inspection of Machine parts

REQUIREMENTS:

• Proficient in the use of precision measurement tools/equipment including but not limited tocaliper, micrometer, height gage, hardness and conductivity.

• Familiar with surface finish, edge preparation and general appearance of machined parts.

• Familiar with outside processing certifications

• Proficient with Engineering drawings/models

• Computer literate

• Understanding of GD&T Tolerance

• Basic knowledge of CATIA

• Basic understanding of a CMM

• Basic understanding of CNC machining

• Understanding AS9100/QMS

• Perform Audits and report findings

• Perform RCCA to solve issues using Lean Manufacturing

• Understanding and performing FAIR,s (Net-inspect is a plus)

• MRB

RESPONSIBILITIES:

• Perform first article inspections on machined parts using micrometers, calipers and other measurement devices while working in compliance with AS9100 standards.

• Conduct inspection of finished machined parts; include in-process from first piece to final inspection.

• Working knowledge of conventional inspections tools and gauges such as:
Micrometers, Calipers, thread gauges

• Communicates with internal customers

• Follow inspection (shop) procedures to accept or reject parts and assemblies, etc.

• Assembly Inspection

• Participates in Audits for AS9100 and Customers

• Perform analytical investigations and develop root cause for non-conformance NCMRs and RMAs

• Set up, program and operate CMM, as well as other measurement/inspection tools (Verisurf is a plus)

• Miscellaneous tasks as assigned

Hours:

* First Shift - Mon.

- Fri., 7 a.m. to 3:30 p.m. (1 - NC Crib Inspection)

* Second Shift - Mon.

- Thurs., 3:30 p.m. to 1:30 a.m. (2- SM Fab Inspection)

* Weekend

Shift: Thurs.

- Sun., 4 a.m. to 4:30 p.m. (1
- Assembly, 1- SM Inspection)