Construction Inspector III CM
Listed on 2025-12-19
-
Construction
Civil Engineering, Site Manager -
Engineering
Civil Engineering, Site Manager
Join to apply for the Construction Inspector III CM role at GAI Consultants, Inc.
About This PositionConstruction Inspector III is qualified to independently perform, test, inspect and record project operations with a high degree of complexity. The Inspector III must have demonstrated ability to perform effectively in the field and in the office with minimal supervision/oversight in all phases of construction. The Inspector III should have the experience and skills to interpret plans, specifications, and standards for multiple areas within the field (drainage, water, sewer, materials, etc.)
and be able to justify when minor field adjustments are needed. The Inspector III can be responsible for the supervision of a small team of inspection staff. Work on medium projects or portions of larger projects as part of the inspection team. Typical projects include highway, roundabout, traffic signal, and bridge.
- In-depth knowledge in the inspection of roadway construction
- Structure construction
- Soil and slope stabilization
- Traffic signals
- Lighting
- ITS
- Report writing
- Material certification
- Contract and plan compliance
- In-depth knowledge of standards and specifications
Field experience and successful completion of NICET Level III testing and requirements. Per NYSDOT policy, the following will also be considered as holding a NICET Level III (equivalent):
- Previous employment by NYSDOT as a title JE/PET.
- Bachelor’s degree in Civil Engineering from an ABET/EAC accredited program or an approved equivalent.
A minimum of five (5) years experience of direct involvement in highway construction inspection or a closely related field and a current NICET Level III certification or approved equivalent. Familiarity with NYSDOT specifications and procedures is required, including MURK reporting. ACI and NETTCP Soils and Aggregate certification or NYSDOT in‑house training are preferred. Computer skills are required and knowledge of Site Manager and/or APPIA software is preferred.
Pay Range: $49.68/hour – $68.28/hour. Pay is based on applicant’s ability/experience and will be rated accordingly.
QualificationsEducation
Required - High School diploma or better in a related field.
Experience
Required - 5 years:
Direct involvement in highway construction inspection or a closely related field and a current NICET Level III certification or approved equivalent.
Licenses & Certifications
Preferred - NICET Cert L-IV Hwy Const
Seniority LevelMid-Senior level
Employment TypeFull-time
Job FunctionManagement and Manufacturing
#J-18808-Ljbffr(If this job is in fact in your jurisdiction, then you may be using a Proxy or VPN to access this site, and to progress further, you should change your connectivity to another mobile device or PC).