Production Welder MIG

Overview

Under close supervision, this position is responsible for operating welding equipment to build high quality parts, subassemblies, and finished product in a manufacturing environment. Weldments vary in type, size, and construction.

• Operates robotic welding equipment to produce scissor assemblies and fabricated metal parts, loads and unloads parts, checks quality of welds, and does basic troubleshooting.
• Operates manual or semi-automatic welding equipment with MIG, holds torch at proper angle to metal and guides along weld joint.
• Produces parts per part print and labor standards to achieve production goals.
• Observes robot operation to detect defects or machine malfunction and reports issues that may fall outside of product specifications.
• Operates saws, ironworker, and drill presses.
• Tack-weld parts in preparation for final welding.
• Chips or grinds off burrs, sharp edges, excess weld, slag, or spatter using hand or bench grinders as well as other power tools.
• Positions and clamps together components of fabricated metal products preparatory to welding.
• Uses inspection devices as necessary to inspect parts and verify that the part is to print as required.
• Maintains a clean, organized work area to support 5S initiative, personal and environment safety goals, and accomplish quality production.
• Follows safety regulations and observes environment to ensure safe working conditions are present and corrects issues that need attention.
• Accurately completes daily time cards and required production documentation.
• Communicates with co-workers to maintain required production line flow.
• Serves as a positive role model in the work place and works in teams to accomplish overall plant goals regarding safety, efficiency, quality, and customer satisfaction.
• May perform other duties as required and/or assigned.

The requirements listed below are representative of the knowledge, skills, physical demands and/or ability required for this position to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• High School Diploma or equivalent
• Minimum of 1 year experience welding in a manufacturing industry or equivalent
• Ability to interpret documents such as safety rules, operating and maintenance instructions, and procedural manuals
• Ability to read measurement devices such as tape measure, combination square, carpenters square, T square, etc.
• Preferred
  -Ability to read and comprehend detailed drawings, prints, and work orders

• Ability to lift, position, move, bend, flip parts in order to accomplish production goals that require loading, adjusting, turning, and removing small and large parts up to 60lbs
• Stands, bends, stretches, reaches, lifts repetitively to accomplish welding and other company-wide production goals
• Ability to occasionally lift greater than 75lbs with assistance
• Ability to stand for extended periods of time, bend, kneel, reach, lift, sit, in hot, cold, dusty, elevated, noisy area where foot and automated equipment movement, airborne, dust/fumes, and ultraviolet light are present
• Ability to operate a forklift
• Exposure to moving mechanical parts

All your information will be kept confidential according to EEO guidelines.