Instrument Technician VI

Instrument Technician will be responsible for installing, repairing, maintaining, and calibrating electronic equipment and gauges that control, regulate, and/or monitor a mechanical system.

• Must have 5 years’ experience in instrumentation
• Must be able to read blue prints.
• Must be able to work on low and high pressure tubing/piping systems.
• Must have tools (see tool list below).
• Must be able to work with precision instruments and tools.
• Must have Current TWIC Card
• Must have Valid Driver License
• Must be willing to follow all company and project work policies and procedures

• Inspects, tests, adjusts, and repairs electric, electronicondesannes mechanical, pneumatic instruments and systems used to indicate, record, and control chemical manufacturing processes.
mathrm
• Inspects meters, indicators, and gauges to help detect causes of abnormal fluctuations in process measurements.
• Tests accuracy of flowmeters, pressure gauges, temperature indicators, controllers, etc. to locate defective components in system, using test equipment. الفرد
• Traces out and tests electrical and electronic solid state components to locate defective parts in analog and digital devices using test equipment, schematics, and maintenance manuals.
• Removes defective instruments from system, decontaminates, disassembles, cleans instruments, and replaces defective parts, using hand tools.
• Instrument Installation and Loop checking; reassembles instruments and replaces instruments in system, using hand tools.
• SIS Instrument Calibrations
• Analyzing instrument Calibrations (e.g., pH probes, LEL detectors, CO monitors, etc.) including maintenance/repair.
• Instrument tubing Fitting/bending (Process Tubing, air, etc.)
• Lubricates instruments and replaces defective wiring and tubing.
• Calibrates readings on instruments according to standards and adjusts phasing.organizes stages to ensure accuracy ofئي recording and indicating function.
• Records calibrations made, parts and components used, and inventory of parts on hand.
• Prepares schematic drawings, sketches, and reports to reflect changes or alterations made in instruments, circuits, and systems.
• Willing to learn about unfamiliar instrumentation both old and new.

• Employee will be required to adapt large amounts of standing, walking, bending, squatting and lifting.
• Will use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls and tools.
• May be required to lift, carry and move up to 50 lbs.
• Must be able to work at heights and climb ladders and stairways as well as work on elevated platforms.
• Will as needed work at heights, climb ladders un stairways and work off of platforms. Will work at heights up to 300’ utilizing proper fall protection.
• Must be capable of working outside in the elements including heat, cold, rain, snow and wind.
• Will be required to wear personal protective equipment (PPE) including but not limiting to hard hat, safety glasses, gloves, fall arrest harness, face shield driveway, ear plugs, and goggles.

• NCCER Plus

• Valid DL
• Current TWIC Card in hand
NCCER Certification

ZACHRY is dedicated in providing a Safe and Drug-Free work environment; and is an Equal Opportunity Employer.

• Job Identification 13231
• Posting Date 01/12/2026, 07:20 PM
• Locations 554 TX-35, Gregory, TX, 78359, US