CNC Machinist II - 2nd Shift

POSITION DETAILS

Set up and operate CNC lathe /mill to perform a variety of machining operations or set-up and operate various manual machines. Edit programs, speeds and feeds. Maintain and check dimensions to blue prints and sketches using a variety of precision measuring instruments. Improvise machine set-up to perform non-standard type of work. Work in a team-oriented environment to meet quality and efficiency goals.

Work in a 6S manufacturing environment and be committed to workplace safety.

• Review the work order requirements and drawings, obtain fixtures and tools for preparation.
• Set up and operate CNC or manual lathes/mills to perform a variety of machining operations, to trace complex profiles requiring changes in set-up, speeds, feeds and tool angles per engineering drawings to meet daily production requirements.
• Set up and operate manual lathes/mills to perform a variety of machining operations i.e. perform single point threading per engineering drawings to meet daily production requirements
• Edit programs, speeds and feeds.
• Use manual tools to debur and degrease.
• Set-up and/or operate various drill presses, punch press involving drilling, taping, reaming, countersinking.
• Use jigs and fixtures, block or shim parts to level and align the irregular shaped parts.
• Check for concentricity, formed sections, steps or shoulder to close +/- tolerances of 0.001" or less for faulty operation or defective material.
• Improvise machine set-up to perform non-standard type of work.
• Train entry level machinist.
• Report any problems or difficulties to the supervisor.
• Maintain work area, equipment and supplies in a neat and orderly condition & 6S.
• Following safety procedures and policies.
• Perform other work-related duties as assigned.

• 2~ 5 years of experience in machining
• Able to set up and operate CNC machine
• Understand of G codes and M codes
• Able to read drawings and blueprints, calculate or determine dimensions not given.
• Able to work independently.
• Able to use measuring equipment, including caliber, micrometers, checking gauge etc.
• Data input skills / computer skills.
• PLC knowledge of controller to be able to edit programs.
• Knowledge of operating manual secondary equipment, drill press, saw, punch press, etc.
• Able to operate lathes and/or mills
• Knowledge of turning, facing and boring to hold tolerances +/- 0.001.
• Lifting up to 50lbs
• EHS awareness
• Flexibility in shift times.
• Flexibility in working overtime.

• HS Diploma/GED or equivalent
• Associate's / Technical Degree (two years) is preferred.

• US Citizen

CIRCOR is an EEO Employer of Females / Minorities / Veterans / Individuals with Disabilities