Welder

Overview

Primary Purpose Of This Position:
Weld steel parts for structural, plate, and misc. steel assemblies per shop drawings and DWS quality requirements.

Position: Welder
FLSA Status: Non-Exempt (Hourly)

• Production Manager
• Shop Foreman

• Weld together structural, plate or miscellaneous steel fabrication according to the weld symbols, weld procedures, dimensions shown on the shop drawings, and AISC code requirements.
• Preheat and/or cut work pieces using a hand torch when required. Clean welds of excess weld, splatter or slag using chipping hammers, wire brushes or grinders.
• Operate forklifts, jib cranes, and overhead cranes in order to move materials.
• Consistently and reliably works scheduled hours at assigned locations.

• Ability to understand and carry out semi-complicated verbal and written instructions.
• Ability to effectively communicate with co-workers and managers.
• Ability to work under periodic supervision focused on the progress of work and setting priorities for job completion.
• Ability to maintain American Welding Society certification on 1-inch plate in flat position using the gas metal arc welding and flux cored arc welding processes.
• Ability to pass the fillet weld break test using the gas metal arc welding process.
• Ability to pass an administered basic welding test that covers shop drawing interpretation, weld symbols, welding processes, weld process symbol interpretation and application and a visual acuity test.
• Ability to possess pride in own workmanship, demonstrate attention to detail, and work safely.
• Ability to make adjustments to welder to insure proper feed rate and temperature.
• Ability to multitask.

• Walk continuously over the course of the 8 to 12 hour work shift. The distances walked will range from a few feet to 60 feet.
• Lift weights up to 20 pounds from floor to chest continuously, including various tools used in the process.
• Lift weights up to 35 pounds from floor to waist frequently during the 10 to 12 hour shift.

• Employee is expected to work 40 hours a week. However, overtime and weekends may be required based on welding needs.
• Hearing to be aware of safety issues.
• Visual ability to read and interpret cut lists and shop drawings. Safety glasses are required in the shop area.
• Exposure to heat, cold, wet and humid conditions in the shop area occasionally.
• Exposure to fumes, odors and dusts in the shop area occasionally.
• Exposure to solvents, greases, oils, and coolants occasionally.
• Wear all required Personal Protective Equipment. PPE includes steel-toe safety shoes, hearing protection, safety glasses, gloves, and hard hats.

Square, Tape Measure, Weld Lead, 4 inch grinder, 9 inch grinder, Ball Peen Hammer, Sledge Hammer, Hand Torch, Wire Brushes, Chipping Hammers, Clamps, Stamping Taps, and Chains.

Welder, Overhead Crane, Jib Crane, Pallets, Saw Horses, and Forklifts.

• High School degree or equivalent.
• Minimum of 2-3 years of experience working as a welder for a steel fabricator or manufacturer, or a one-year degree or certificate in welding technology from a qualified trade school or college.

EEO Employer/Vet/Disabled

Thank you for applying! If we're interested, we'll contact you. Please do not call regarding your application.

Job Posted by Applicant Pro