Maintenance Mechanic Security Clearance

Position: MAINTENANCE MECHANIC with Security Clearance
Duties
* You will perform a variety of tasks involved in the upkeep of building, grounds, and related structures, fixtures, and utilities.
* You will determine the methods, techniques, devices, and materials that are best suited to the surface finished required.
* You will construct and repair a wide variety of structural items such as building frames, interior and exterior trim, and miscellaneous items such as bookcases, cabinets, etc.
* You will construct, maintain, install, modify, and repair electric power and lighting systems and all associated circuits.
* You will lay out pipping systems or sections and plans assembly in relation to walls, passageways, obstructions, underground, tunnels, locations of machinery, appropriate places for holes, and similar considerations. Requirements Conditions of employment
* Must be a US Citizen.
* Must be determined suitable for federal employment.
* Must participate in the direct deposit pay program.
* New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
* Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
* Males born after 12-31-59 must be registered for Selective Service.
* This is a bargaining unit position.
* Position requires incumbent to stand, stoop, bend, kneel, climb, and work in tiring and uncomfortable positions.
* Frequently lifts, carries, and sets up tools, equipment, and parts that weigh up to 44 pounds. Occasionally, may lift and carry items that weight over 45 pounds. Assistance is usually available with heavy items.
* Work is done inside and outside, and is usually dirty, greasy, smokey, dusty, noisy, fumes, cold, dampness, etc.
* Work must sometimes be performed outside in bad weather and in areas that are noisy and where bad smelling toxic fumes are present.
* Incumbent may be required to work up to 60 feet off the ground on platforms, work stands, or ladders.
* You will be required to successfully complete a pre-appointment physical examination.
* You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
* You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift. Qualifications In order to qualify for the MAINTENANCE MECHANIC, WG-4749-10 position, your resume must provide sufficient experience and/or education, knowledge, skills and abilities to perform the duties of the specific position for which you are being considered.

Your resume is the key means we have for evaluating your knowledge, skills and abilities as they relate to this position. Therefore, we encourage you to submit a thorough resume that directly relates to this position. Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying.

Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible.

The Screen-out Element for this position is: THE ABILITY TO DO THE WORK OF AN MAINTENANCE MECHANIC, WG-4749-10 WITHOUT MORE THAN NORMAL SUPERVISION performing masonry, framing, rigging, electrical work, sheetrock installation, flooring installation, roof and drain cleaning, and other renovation tasks, and reading blueprints and performing various maintenance and repair duties to ensure the proper functioning of the facility. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations.

Additional qualification information can be found at:
Education This job does not have an education qualification requirement. Additional information There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer. This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or…