Machine TOOL Operator Security Clearance

Responsibilities

• You will operate conventional and/or computer numerical control (CNC) machines to perform a specific machining operation in the machining of castings, forgings, or other raw stocks made of metals or other materials to complete work assignments.
• You will follow detailed instructions concerning the location of necessary dimensions on blueprints, sequence of machine operations, machine feeds/speeds, tools to be used, alignment processes, and predetermined machine dimensions.
• You will use precision and semi-precision measuring instruments (i.e. micrometers, vernier height and depth gages, indicators, etc) to complete tasks.
• You will use a variety of standard machine attachments and equipment to produce work to dimensions, tolerances, and surface finishes specified in technical directives, work orders, or instructions received from the supervisor or higher graded worker.

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• You will be required to successfully complete a pre-appointment physical examination.
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
• You will be required to obtain and maintain the required levels of certification and/or training.
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes.

• Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.
• Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible.
  
  The Screen-out Element for this position is:
  Ability To Do The Work Of The Position Without More Than Normal Supervision such as:
• Setting up and operate all types of conventional machines and tools in the manufacture, rework, and repair of aircraft components or other items for various Fleet Equipment (F/E), and fleet support work;
• Operating one or more conventional and/or computer numerical control (CNC) machines to perform a specific machining operation in the machining of castings, forgings, or other raw stock made of various metals, metal alloys, and other materials, to complete work assignments;
• Controlling the machine feeds and speeds, change and use different cutting tools for successive operations, and makes minor changes in machine settings to maintain sizes or shape of the workplace; AND
• Performing machine operations on conventional and/or CNC machine tools such as lathes, boring mills, milling machines, grinding machines, shapers, planners, or radial drills after the machine has been set up and checked for proper operation by a higher grade worker.

• Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at:
  Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and…