Primary Lead Operator

Roles & Responsibilities

This is a full-time position will be responsible in providing support to the team leaders and upper management.

• Ensure 5S is maintained in the respective work area (Debinding, Sintering & Heat treatment)
• 5S check list should be filled at the start of every shift
• All parts must be clearly identified with the respective sintering cycle number/heat treatment cycle number
• Unidentified parts/fallen parts must be properly disposed in the FOD bin
• Move parts which are cleared by Quality from one process to the next as per the route card

• Load sintering fixture as per the plan
• Ensure the parts loaded on the fixture can be combined in one cycle as per the recipe list available near each sintering furnace
• Ensure parts are being staged on the sintering fixture are as per staging instruction
• If no plan is available, take initiative to check with the team lead about the next plan
• Load the sintering fixture in the sintering furnace as per plan and start the cycle
• Ensure proper recipe is selected for the sintering cycle
• Prepare run sheets by ensuring correct quantities are being transferred and all the check points are verified
• Display run sheets on the sintering furnace
• Print the route cards from doc-pro for each part loaded on the sintering fixture
• Sinter , date, quantity, process start date & shift, process end date & shift should be filled on the route card
• Unloading of fixture after completion of cycle
• Unloading of parts from the fixture into bins and label each bin with part number, cycle number and quantity.
• Filing the run sheets in the filing cabinets after unloading the parts
• Moving the ceramics to the ceramic storage area to their respective locations
• Clean Sintering fixture using vacuum cleaner after unloading every cycle

• Load heat treatment fixture as per the plan
• Ensure the parts loaded on the fixture can be combined in one cycle as per the recipe list available near the heat treatment planning board
• Ensure parts are being staged on the heat treatment basket as per staging instruction
• If no plan is available, take initiative to check with the team lead about the next plan
• Load recipes on the heat treatment computer as per the plan
• Prepare run sheets by ensuring correct quantities are being transferred and all the check points are verified
• File the old route card which has the information about the previous process carried and QC stamp in the filing cabinets

• Clean ceramics and prepare magazines for molding