Prototype Machinist

Pay Range

Arnold Magnetic Technologies provided pay range:
Base pay range $25.00/hr - $35.00/hr. (Actual pay based on skills and experience.)

Individual will be responsible for producing, modifying and repairing tools used in the manufacturing process. Must have 10+ years of experience reading prints and using mills, lathe, surface grinders and other standard tool room machines to make parts to print. Must have good attention to detail and accustomed to working and measuring to close tolerance and delicate parts. Responsible for maintaining work quality and doing in process inspection.

• Assembling, fitting and repairing tools
• Following engineering drawings, including interpreting GD&T
• Using 2D and 3D CAD/CAM software
• Assisting with tool maintenance
• Teach basic machine operation to floor operators as required
• Give experienced input to tooling designs for better manufacturability
• Complete production operations requiring tool room machines
• Other tasks not listed here that arise from an ever-growing environment
• Other duties as assigned

• Measurement
• Make tools to engineer parts
• Parts measured to print
• Assemble and debug prototype tools
• Tools made for production put to use
• Readily assist production and engineer as required
• Tasks completed in a timely manner

• Education:
  
  High school diploma or GED/Technical Training Certificate/Equivalent experience.
• Work experience:
  
  Journeyman Tool & Die Maker or equivalent with 5+ years of experience.
• Ability to read engineering prints with high understanding of GD&T.
• High competency using micrometers, indicators, calipers, etc.
• Requires intermittent long periods of standing and/or walking.
• Periodic lifting of materials not to exceed 40 pounds.
• Willing to work beyond normal hours if needed.
• Subject to stressful situations.
• An understanding of both Metric and English measuring systems.
• Ability to write and edit programs with understanding of cutting parameters.
• Ability to use Manual Knee Mill, Manual Lathe, Grinder, Machine Tools, Inspection and measuring instruments such as micrometers, calipers, indicators and power hand tools.

• May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals.
  
  NOTE:
  
  All safety precautions will be used.
• Plant wide climate control and air conditioning.
• Could work in areas with excessive noise.
  
  NOTE:
  
  Ear protection available.

• Could require intermittent and long periods of sitting and/or standing.
• Required to do repetitive work.
  
  Periodic lifting of materials not to exceed 50 pounds.

Mon-Thurs: 5:30am - 3:00pm
Fri: 5:30am-9:30am

Mid-Senior level

Full-time

Management and Manufacturing

Mining

Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran.