Machined Parts Finisher C

Position: Machined Parts Finisher C - 72103
Boeing Commercial Airplanes is excited to offer opportunities for a
** Machined Parts Finisher
** to join our Fabrication team in
** Puyallup and Auburn, Washington.
*** Prioritize and execute jobs based on order of priority or as assigned by the lead.
* Verify that prior operations have been completed according to the work order and review instructions for subsequent operations.
* Inspect parts for obvious defects and ensure that quantities and part numbers match the work order.
* Collaborate with the area lead and quality focal to review nonconformance items and engineering dispositions for rework.
* Obtain and review necessary drawings, specifications, and documents to perform the job, utilizing online information systems as required.
* Gather hand or air-powered tools needed for the assigned job, such as files, routers, and sanders.
* Handwork part surfaces to break sharp edges, form radii, and blend mismatches according to drawings and specifications.
* Use precision measurement tools, such as micrometers and calipers, to verify dimensions and check surface finishes.
* Remove tool tabs from aluminum parts using air-powered tools, such as burr guns and grinders, as necessary.
* Check completed work to ensure operations are finished per drawings and that there are no visible defects.
* Clean parts and mark them according to work order specifications using appropriate tools like vibro engravers or steel stamps.
* Protectively wrap parts for transportation in accordance with work order requirements.
* Document completed operations in work orders and/or online computer systems.
* Notify the lead when a job is complete to facilitate inspection or in-process checks.
* Operate pendant-controlled overhead cranes and pallet jacks to move parts as required.
* Handle and dispose of hazardous materials in an approved manner, following safety regulations.
* Consult with the lead, supervisor, or others regarding process or job-related issues as needed.
* Use power equipment, such as band saws and grinders, to remove flashings, burrs, and surface irregularities.
* Perform finishing operations, including breaking and finishing threads, tapping, reaming, and chamfering, to complete machined parts.
* Maintain personal and tool certifications to ensure compliance with industry standards.
* Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.
* Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
* Work in environments that may involve contact with metals, solvents, and coolants.
* Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
* Adapt to varying noise levels and atmospheric conditions.
* Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
* 1+ year of experience working with cutting tools and hand tools.
* 1+ year of experience with various types of hand-held power tools.
* Ability to use and operate low impact vibratory tools (buffer).
* Ability to lift, push and pull up to 35 pounds.
* Experience working with precision measuring tools.
* Experience interpreting manufacturing blueprints.
* Basic computer skills.
#J-18808-Ljbffr