Spar Mill Operator - Numerical Control

Position: Spar Mill Operator - Numerical Control - 17908
Boeing Commercial Airplanes is excited to offer opportunities for a
** Spar Mill Operator - Numerical Control
** to join our Fabrication team in Puyallup and Auburn, Washington.
* Set-up, adjust and operate numerical controlled spar mills to perform any machining operations.
* Operate machines to make the first run of new or revised numerical directed machining programs.
* Observe and check operations to detect errors.
* Suggest corrections or revisions in numerical programs to improve quality and quantity of work.
* Select suitable or specified cutting tools and visually and dimensionally check to determine if
* tools will function properly.
* Use all precision measuring instruments, gauges, tools, etc.
* Select and secure proper tools, fixtures, machine attachments, equipment, etc.
* Work with and interpret charts, set-up documents, orders, blueprints, tooling and perform layout and use shop math including trigonometry.
* Use and adjust feed rate of oils and coolants.
* Detect faulty tools and take corrective action in accordance with shop practices and shop procedures and replace same.
* Position, locate and secure work pieces in or on work holding devices.
* Operate and set machine controls to cycle, recycle, start and stop machine operations and to synchronize tape and cutting tools with specified start points.
* Coordinate the efforts of assigned employees, assisting in the set-up operation and adjustment of the machine, in loading and unloading machine, and cleaning of machine and area
* Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
* Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
* Work in environments that may involve contact with metals, solvents, and coolants.
* Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
* Adapt to varying noise levels and atmospheric conditions.
* Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
** Basic Qualifications****:
*** 1+ years of experience setting up and operating Manual and CNC machines.
* 1+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators.
* 1+ years of experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications.
* 1+ years of experience working with powered hand tools.
* Experience with reading and interpreting drawings/ blueprints.
* Proficiency in reading, writing, and speaking English.
* Overhead crane experience/ pendant non-pendant radio control.
* 2+ years of experience setting up and operating Manual and CNC milling machines.
* Completed a Machinist Apprenticeship program or completed a Machining Certificate.
* Experience in Fabrication of airplane parts
#J-18808-Ljbffr