Stretch Press Operator

Position: Stretch Press Operator A - 13207
* Completely set up, operate, and adjust all types and sizes of stretch presses and their accessories to properly stretch form sheet stock, plate stock, and extrusions to meet quality requirements and specifications.
* Mark location points as indicated by dies and locate, secure, and align forming dies on the press bed.
* Determine and set proper pressure, speed of travel, and stops using trial and error, stretch charts, or manufacturing process information.
* Select and apply proper lubricants to dies and maintain records of various setups for future use.
* Perform stretch forming involving reverse and double curvature contours using various drawing methods and independent ram action.
* Check formed parts using prints, checking fixtures, templates, or forming dies to ensure compliance with specifications.
* Remove folds and wrinkles from formed parts using hand and power tools, and trim parts after locating proper trim lines.
* Set up or check the setup for lower-graded employees, including checking first parts and outlining operational sequences.
* Obtain work packages and review work orders to determine tasks, ensuring prior operations are completed and correct materials are issued.
* Perform safety checks on machines, ensuring the work area is clear of obstacles and safety features are properly attached.
* Move heavy materials and tools to the work area using stackers or overhead cranes, and select machine accessories and holding devices.
* Load and secure forming dies on the press, making adjustments per setup notes and tooling usage instructions.
* Run the press cycle, ensuring parts are free from defects before forming, and check parts periodically for alignment and necessary adjustments.
* Perform first part checks and completed job checks to ensure compliance with drawings and submit jobs for inspection.
* Perform tool tryouts on new and reworked tools, clean parts, equipment, and tools as required, and consult with engineering, planning, inspection, or customers on process or job-related issues.
* Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
* Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
* Work in environments that may involve contact with metals, solvents, and coolants.
* Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
* Adapt to varying noise levels and atmospheric conditions.
* Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
* 1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division).
* 1+ years of experience with using precision measuring tools and equipment such as micrometers, calipers and dial indicators, etc.
* 1+ years of experience using hand tools and/or hand-held power tools.
* 1+ years of experience reading engineering blueprints and drawings.
* Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift.
* 1+ years of experience in computer programming.
* Proficiency in reading, writing, and speaking English.
#J-18808-Ljbffr