Break Press Operator​/Fabricator; Temp

Break Press Operator / Fabricator (Temp to Hire)

Join to apply for the Break Press Operator / Fabricator (Temp to Hire) role at Mobo Trex
.

Over a Half-Century of Safely Moving People, Mobo Trex has been committed to advancing traffic management solutions since 1969. Our founders recognized the importance of smart mobility and its critical role in shaping the future of cities and economies.

Job Type: Full-time

Mobo Trex has an opportunity to join our growing organization as a full-time Break Press Operator / Fabricator (Temp to Hire) at our location in Pflugerville, TX. Must be able to work Mon‑Fri 7:00 am – 3:30 pm. We offer a positive culture where every employee’s unique expertise contributes to our success.

• Must be able to read engineering/specification drawings to obtain information regarding the fabricating of components.
• Set-up and operate fabricating machinery, such as turret punch press, manual & robotic brake press, CNC Mill and CNC Lathe, or other similar fabrication equipment.
• Certified to shop standards in at least two of the following pieces of equipment: punch press, brake press, robot welder, mill, and lathe.
• Verify conformance of parts to specifications, using precision measuring equipment.
• Conduct oneself professionally through appearance and conduct.
• Respond to work orders in a timely manner with emphasis on operation accuracy & support.
• Must be able to work effectively with minimal supervision.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to read, write and speak English to a satisfactory level.

High school diploma/GED with relevant years of sheet metal experience required. Technical degree preferred.

• Able to communicate effectively and work well as a member of a team.
• Must be able to pay attention to detail.
• Requires the use of shop mathematics, geometry and trigonometry.
• Must be able to stand for long periods of time, often doing repetitive motions.

While performing the duties of this job, the employee is required to sit, talk or hear, and use hands to finger, handle, or touch objects or controls. The employee is regularly required to stand and walk, and to use hands repetitively. The employee must occasionally lift 45 pounds to waist level and 30 pounds to shoulder height. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Entry level

Full‑time

Management and Manufacturing

Industrial Machinery Manufacturing