Quality Control Lead

QC Lead I - Kingsbury

Full-time/Part-time
EMC-R54/64-6

Responsible for quality of all incoming products and material. Make sure all parts meet Dwyer specifications.

• Update all QC files as required.
• Inspect incoming material by following the QC procedures.
• Strong understanding of AS400, can look up PO’s, DMR’s, IP’s, and scrap.
• Maintain an effective dialogue with all employees to foster good employee morale.
• Organize work areas before, during and after assignments. Is responsible for general housekeeping and organization of workstations.
• Parts must be inspected in a timely fashion to prevent down time on the lines. Limit withdrawals from the QC area.
• Review Engineering Change Request (ECR’s) to ensure files are updated accordingly.
• Issue DMR’s and advisories for defective products.
• File claims with UPS/Fed Ex for damaged and missing products.
• Verify ROHS certificates are included with shipments, contacts purchasing when missing.
• Perform first article evaluations and works with line leads to get parts tested.

• Limit mistakes by reviewing quality of own work and following instructions.
• Limit scrap by inspecting all incoming material and ensuring it meets the quality standards. Prevent bad parts from being taken to the lines.
• Have strong organization skills.
• Achieve Safety objective for the plant.

• Must be 18 years of age.
• Must be a US citizen or have authorization to work in the US issued by the Department of Homeland Security.
• Minimum of 2 years of service.

• Able to stand or sit for prolonged periods of time.
• Able to read/speak in English and follow verbal/written instructions.
• Able to count and sort.
• Able to interact/communicate with respect of fellow co-workers and management.
• Able to push/pull and reach above shoulders.
• Able to control operation of hand and/or foot.
• Able to turn wrist frequently in a repetitive motion.
• Able to lift/carry up to 50 pounds.