Painter

Painters, Transportation Equipment Job Purpose

Operate or tend painting machines to paint surfaces of transportation equipment, such as automobiles, buses, trucks, trains, boats, and airplanes.

• Dispose of hazardous waste in an appropriate manner.
• Select paint according to company requirements, and match colors of paint following specified color charts.
• Mix paints to match color specifications or vehicles' original colors, then stir and thin the paints, using spatulas or power mixing equipment.
• Remove grease, dirt, paint, and rust from vehicle surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
• Pour paint into spray guns, and adjust nozzles and paint mixes in order to get the proper paint flow and coating thickness.
• Monitor painting operations in order to identify flaws such as blisters and streaks so that their causes can be corrected.
• Sand vehicle surfaces between coats of paint and/or primer in order to remove flaws and enhance adhesion for subsequent coats.
• Disassemble, clean, and reassemble sprayers and power equipment, using solvents, wire brushes, and cloths for cleaning duties.
• Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
• Remove accessories from vehicles, such as chrome or mirrors, and mask other surfaces with tape or paper in order to protect them from paint.
• Allow the sprayed product to dry, and then touch up any spots that may have been missed.
• Apply rust-resistant undercoats, and caulk and seal seams.
• Select the correct spray gun system for the material being applied.
• Apply primer over any repairs made to vehicle surfaces.
• Adjust controls on infrared ovens, heat lamps, portable ventilators, and exhaust units in order to speed the drying of vehicles between coats.
• Fill small dents and scratches with body fillers, and smooth surfaces in order to prepare vehicles for painting.
• Apply designs, lettering, or other identifying or decorative items to finished products, using paint brushes or paint sprayers.
• Paint by hand areas that cannot be reached with a spray gun, or those that need retouching, using brushes.

• Must have 5 years experience painting

• Time Management - Managing one's own time and the time of others.
• Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Management of Material Resources - Obtaining and seeing to the appropriate use of equipment, facilities, and materials needed to do certain work.
• Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one.
• Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Repairing - Repairing machines or systems using the needed tools.