CNC Programmer ( setup​/operator​/programmer​/Machinist

CNC Programmer (setup/operator/programmer/machinist)

• Contract

Title: CNC Programmer (setup/operator)

Location: Swedesboro, NJ

Objective: Program, set up, and operate Computer Numerical Control equipment to fabricate proprietary parts.

• Write and modify CNC programs for basic 2 and 3‑axis machines to machine parts per print/drawing. May review programs with higher‑level personnel.
• Read machine manuals and Fanuc manuals to learn how to develop CNC programs.
• Review drawings, blueprints, sketches, manuals or sample parts to determine sequence of operations and setup requirements.
• Analyze, install, test, review program to increase operating efficiency.
• Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines. Check for functionality and performance.
• Calculate and set controls to regulate machining factors such as speed, feed, coolant flow, depth, and angles.
• Input or retrieve the correct program code from the machine and network.
• Perform first‑piece inspections and in‑process quality control checks using tools such as micrometers, calipers, depth gauges, go/no‑go gauges, comparators, etc.
• Change tooling and offsets when necessary to assure product meets tolerances and specifications.
• Perform routine maintenance on machines and equipment.
• Complete required paperwork: routing sheet, time sheet, etc.
• Confer with supervision, area leaders, programmers, engineers, or others to resolve machining or assembly issues.
• Maintain acceptable levels of production according to established standards.
• Practice good housekeeping and safety procedures and adhere to all company policies.

• Understand M & G codes and how they are used to command the machine.
• Ability to interpret drawings, blueprints, and written/verbal instructions with limited supervision to set up and operate CNC equipment.
• Ability to verify parts using quality measuring devices.
• Ability to lift up to 50 lbs.
• Able to stand for long periods of time.
• Able to lean and reach.
• Able to run manual equipment.
• Strong preference for candidate with wire EDM experience.
• Strong understanding of M&G codes required.

• CAM software skills
• Formal CNC training
• 5+ years' experience
• No supervisory responsibilities.

Contact:
Direct 732‑339‑3518‑2065

All your information will be kept confidential according to EEO guidelines.