CNC Programmer ( setup​/operator​/programmer​/Machinist

CNC Programmer ( setup / operator / programmer / Machinist )

• Contract

Title: CNC Programmer (setup / operator),
Location: Swedesboro, NJ

Objective: Program, set up, and operate Computer Numerical Control equipment to fabricate proprietary parts.

• Write and modify CNC programs for basic 2- and 3-axis machines to machine parts per print/drawing.
• Review programs with higher-level personnel.
• Read machine manuals and Fanuc manuals to learn how to develop CNC programs.
• Review drawings, blueprints, sketches, manuals, or sample parts to determine sequence of operations and setup requirements.
• Analyze, install, test, review program to increase operating efficiency.
• Select, align, and secure holding fixtures, cutting tools, attachments, accessories, and materials on machines; check for functionality and performance.
• Calculate and set controls to regulate machining factors such as speed, feed, coolant flow, depth, and angles.
• Input or retrieve the correct program code from the machine and network.
• Perform first piece inspections and in-process quality control checks using tools such as micrometers, calipers, depth gauges, go/no-go gauges, comparators, etc.
• Change tooling and offsets when necessary to assure product meets tolerances and specifications.
• Perform routine maintenance on machines and equipment.
• Complete required paperwork routing sheet, time sheet and etc.
• Confers with supervision, area leaders, programmers, engineers, or others to resolve machining or assembly issues.
• Maintain acceptable levels of production according to established standards.
• Practice good housekeeping and safety procedures and adhere to all company policies.

• Understand M & G codes and how they are used to command the machine.
• Ability to interpret drawings, blueprints, and written/verbal instructions with limited supervision to set up and operate CNC equipment.
• Ability to verify parts using quality measuring devices.
• Ability to lift up to 50 lbs.
• Ability to stand for long periods of time.
• Ability to lean and reach.
• Ability to run manual equipment.
• Strong knowledge of M & G codes; prefer someone with wire EDM experience.

CAM software skills, Formal CNC Training, 5+ years' experience.

No supervisory responsibilities.

Contact:

-2065

All your information will be kept confidential according to EEO guidelines.