Shipfitter

Overview

Labor One is hiring Shipfitters for a project in San Diego, California. Shipyard experience is required.

Please contact our team for more information!

Cell:  or

Walk-ins Accepted! Apply today!

1625 Hoover Avenue, National City, CA 91950

Office

Hours:

8:00 AM - 5:00 PM

Assembles, cuts, and grinds metal structural parts to include plates, bulkheads, strong backs, turnbuckles, and come-along. Aligns parts in relation to each other. Tacks and welds foundation and structural members. Performs layout work according to blueprints or reference lines. Marks location of holes to be drilled, drives wedges, and installs temporary fasteners to hold the part in place for welding. Performs other related tasks as assigned.

Minimum two years of on-the-job experience demonstrated knowledge of blueprint reading, ship terminology, and different metals required. Good burning, welding, and craftsmanship skills. Mechanical ability preferred. T-1 welding certificate required for FCAW (flux core), SMAW (stick) optional but highly recommended. Ability to pass hands-on assessment tests conducted by the shipyard. Must be able to work at heights, in confined spaces, and on any assigned shift.

Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, and read and comprehend safety instructions, regulations, and warnings.

• Lay out work from a blueprint.
• Cut, burn, grind, rip out, and fit metal structural parts for placement on the ship.
• Tack and weld foundation and structural members.
• Operate high-reaching equipment including condors, sky climbers, and scissors lift.
• Set up tools and equipment at the job site. Cleans up and removes scrap to nearest scrap tub.
• Operate overhead cranes and use rigging equipment.
• Other job duties may be assigned relevant to the trade.
• Materials, Tools, Equipment, Work Aids
• Blueprints, welding equipment, grinders, cutting torch, hand tools, come-along, chain hoist, turnbuckles, porta power, sky climbers, condors, dock arms, scissors lift, and personal protective equipment.

• Lifting up to 50 lbs. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings, and working in reclined positions, as needed.
• Works in all areas of the shipyard and on board ships.
• Hearing warning signals, reading, and comprehending safety instructions.
• Must be able to maintain general safety awareness and avoid hazards commonly present in employee’s work area.

• General housekeeping in work areas.
• May be required to attend safety, quality, and/or process improvement meetings.

• Exposure to fumes, odors, dust, gases, various climates and temperatures, and low ventilation conditions, all of which can cause discomfort and/or respiratory difficulties.
• Exposure to constantly moving machines, mechanical parts, and high levels of constant noise.

Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.