Pipefitter Journeyperson N

Overview

Labor One is hiring Journey-Level Pipe fitters for a project in San Diego, California
. Shipyard experience is required.

Please contact our team for more information! Cell: ;  or . Please text if we don t answer. Walk-ins Accepted! Apply today!

Address: 1625 Hoover Avenue National City, CA 91950
Office

Hours:

8:00 AM-5:00 PM

• Must be able to comprehend instructions, drawings, and general correspondence.
• Must have a comprehensive knowledge of ship repair terminology and ship compartment naming convention.
• Must be physically and medically capable to wear all required PPE for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.
• Must be able to effectively confer job related information such as conditions found reports in writing that include recommended corrective action.
• Must have a thorough knowledge of experience with P-73 joint fit-up.
• Must have a comprehensive knowledge of Silver Brazing theory.
• Must be able to certify in:
  • MT Braze (B-1)
  • MT Braze (B-2)
• Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals.
• Must possess a comprehensive knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting.
• Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work.
• Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems.
• Must have six (6) years of pipe fitting experience, four (3) of which in the maritime repair environment.

• Provide direction to a pipefitter Improver and Helper if assigned.
• Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor.
• Work shifts and overtime as assigned.
• Be accountable for completion of daily work assignments.
• Comply with OSHA standards and shipyard s best safety practices.
• Keep your work area clean and safe at all times, especially at the end of the shift.
• Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary.
• Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor.
• Comply with the Company’s Non-Discrimination and Anti-Harassment Policy which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment.
• Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions.

• Inspect and prepare the area for work, taking special care if hot work is required. Verify gas free certifications and tag-outs, before commencing any work.
• Run lines and leads required to accomplish work. Accomplish drop test if using flammable or oxygen depleting gases.
• Inspect work for defects before turning the job over to welders. Correct fit-ups as required. Confer with supervision before correcting deficiencies.
• Document existing conditions before commencing work using Condition Found Reports (CFR).
• Remove damaged pipe in accordance with drawings and specifications.
• Measure or template pipe for fabrication.
• Blank systems in accordance with standard Item 009-24 or other applicable safety standards.
• Fit up new pipe using the proper fit up type in accordance with specifications.
• Ensure a strain free fit-up to pumps or other connecting equipment.
• Blank tanks and accomplish boundary air tests.
• Accomplish or verify Lock-out Tag-out requirements before commencing.

The working environment in the shipyard varies from normal office conditions to outside where precipitation, wind, extreme cold, heat and high humidity are not unusual. When working inside vessels the environment may be smoky, hot or cold, and have low illumination. There are heavy equipment and power tools operating almost at every location. Reasonable accommodation may be made to enable…