Machinist II - Case​/HMC- 1st Shift

Machinist II - Large Case/HMC3 - 1st Shift

Join to apply for the Machinist II - Large Case/HMC3 - 1st Shift role at CIRCOR International, Inc.

Set up and operate by tape, manuscript or manual computer control, a variety of work involving operations such as milling, facing, drilling, reaming, boring, tapping, slotting, grinding, turning and other operations.

• Deburring and cleaning parts in preparation for Hydro test.
• Make necessary inspection checks and chart dimensions as required, to ensure accuracy of part due to tool wear or deflection.
• Select and set proper holding devices, fixtures, and necessary attachments; layout as required. Position part or parts to be machined on machine table using lifting equipment as required; clamp in position for machining so as to avoid springing or damage to finished surfaces.
• Adjust and set cutting tools in tool changers or heads, grind single point cutting tools as required; select proper speeds and feeds; select and set attachments such as dividing heads and rotary index table as required.
• During automatic cycle time operator performs miscellaneous operations such as preparing next piece for machine, simple deburring and hydro test operations, or the operation of supplemental machines.
• Utilize CBS visual management board for scheduling and reporting. The use of computer software and hardware is required.
• Use precision measuring instruments such as verniers, micrometers, dial indicators, templates, feelers, gages of all types, scale, calipers, and electronic measuring equipment to maintain dimensions and tolerance as required.
• Set up and hydrostatic test parts using test presses and/or fixtures as required. Apply required pressure by hand, pump or valve; use pressure gages to determine and maintain proper pressure; observe for leaks and report to supervisor for dispositions; stamp as required; apply sealing solution and treat as directed.
• Remove surplus metal, sand, cores, bead splatters, rust, scale, burrs, high spots, ragged edges and foreign matter from unfinished or finished parts. Load and unload production washing machinery. Preserve with rust preventative as required.
• Keep working area, machines and equipment in a clean, orderly condition. Safeguard working area as necessary. Wear all safety equipment that is necessary on the job.
• Operate all machining equipment, hydro and pump test stands. Use basic cutting tools, dividing head, boring heads, parallels, jacks, vee blocks, hand tools, hoist operated cranes, lifting equipment, torque wrenches, hand and power grinders, files and sanding disc as required.
• Work from verbal or written instructions, with or without job tag instructions; read and work from blueprints, charts, sketches, process specifications and masters. Perform all duties without assistance, except on unusual or difficult jobs. Consistently produce work of proper quality and of proper required quantity.

• Use of advanced trades mathematics, complicated drawings, specifications, charts, tables, handbook formulas; proficiency with all varieties of precision measuring instruments.
• Ability to perform all essential duties satisfactorily, including wearing personal safety equipment.
• 10 years machining experience or 3-4 years HMC experience (preferred).
• Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• High school diploma, GED, or equivalent certificate required.
• Minimum of three years prior machining experience.

Mid-Senior level

Full-time

Management and Manufacturing

Industrial Machinery Manufacturing

Referrals increase your chances of interviewing at CIRCOR International, Inc. by 2x

Apply BELOW