Heat Specialist LG 1st shift

Overview

Heat Treat Specialist LG 12 1st shift — Monogram Aerospace Fasteners

Primary

Location:

3423 S Garfield Avenue, Commerce, CA 90040 USA
Workplace Type:
On-site

Employment Type:

Hourly | Full-Time
Function:
Manufacturing Production / Distribution

Equal Opportunity Employer Minorities/Women/Veterans/Disabled

• Operates heat-treating equipment and makes settings and adjustments to obtain specified mechanical properties per material documentation.
• Check incoming materials and determine proper furnace settings and adjustments according to heat treat specifications.
• Monitor heat treating equipment to maintain proper settings and adjustments.
• Determine appropriate heat treatment procedures for all materials in collaboration with appropriate personnel.
• Record temperature and time cycle data and post data per established procedures.
• Move products or heat-treating supplies within the department or to designated areas of the plant.
• Perform daily and preventative maintenance on heat-treating equipment and tools; effect minor repairs as necessary and assist with major repairs.
• Perform 5S cleaning, inspection, and lubrication of equipment and the department.
• Visually or with precision measuring instruments verify product specifications (e.g., tensile strength, shear tolerance, micro hardness).
• Perform or direct cleaning operations before, during, and after heat treating.
• Ensure production quality and quantity within the heat-treating area.
• Actively participate in problem solving, team-building, and other team activities to improve processes, productivity, and quality; communicate effectively and assist other department members as required.
• Perform system accuracy tests as required.
• Set up and perform temperature uniformity surveys.

• Communication Proficiency
• Problem Solving / Analysis

• Responsible for start-up, shut down, and condition monitoring of all heat-treat equipment.
• Set up multiple loads across and various types of heat-treating equipment; perform repairs and keep the department clean.

• Perform duties requiring close attention to work, supporting documentation, specifications, and other requirements.
• Ensure work is performed accurately to meet quality and performance requirements; verify results with visual inspection and precision measuring instruments.

• Maintain clear and accurate communication with team and other personnel regarding quality and production flow. Train employees of equal or lower classification in heat-treating operations and procedures as used by the company.

• Maintain NADCAP certification through audit preparation and performance; review industry standards when revised to ensure compliance and equipment capability to change.

• Maintain good housekeeping and knowledge of heat-treating equipment safety; adhere to company safety rules.

• Show initiative solving problems associated with setup and operation of at least two heat-treating pieces of equipment concurrently; adapt tooling and shop aids to complete operations.
• Suggest improvements to workflow or equipment operation and take on additional tasks as needed.

• Work in a machine shop environment with typical industrial noise and temperature fluctuations.
• Unavoidable hazards include cuts, bruises, muscle strain, burns; exposure to metalworking fluids, airborne particles, and extreme high temperatures. Appropriate protective wear is required.

• Physical — Able to lift up to 100 pounds; manually adjust equipment; reach, bend, and stretch; operate multiple heat-treating machines concurrently; typically stand or sit for extended periods.
• Mental — Work can be highly repetitive; setup and adjustments may require improvisation; interpret technical documentation; run at least two pieces of equipment concurrently and organize workflow efficiently.
• Visual — Close attention to detail; read precision instruments; visually check work pieces for quality.

Demonstrated ability to read and write English for company documents and software entry; apply…