Rework Grinder - Deer Creek; Portland

Overview

Mission:
To remove surface and subsurface defects from castings in order to meet customer specifications.

• Review x-ray/inspection paperwork, sketches, and blueprints to determine grinding requirements.
• Remove surface and blind cavity defects from castings using rotary files, burrs, abrasives, or belts to prepare castings for repair.
• Blend and rework repaired areas to specified tolerances; may use a hand-held sandblaster.
• Grind and blend defect areas on castings; blend welds to blueprint tolerances.
• Assure compliance with customer specifications through inspection and documentation.
• Perform inspection activities to verify dimensional compliance using micrometers, calipers, ultrasonic testing, and similar inspection devices.
• Perform fluorescent penetrant inspection tests on parts to verify removal of surface and subsurface defects; apply penetrant, let dry, wash off, and inspect for defects.
• Complete logs and records; provide work direction and training to junior grinders as assigned.
• Adhere to plant and department safety rules; safely operate all equipment and tools; identify and report safety problems.
• May be required to handle hazardous waste; perform other tasks as directed.
• Take responsibility for and demonstrate safe work practices.

• Entry
  
  Qualifications:
  
  Grinding skills and working knowledge of grinding tools, equipment, and materials; or an equivalent combination of classroom training and work experience.
• Basic ability to follow instructions, read, write, and perform arithmetic calculations.
• Ability to use and read dimensional tools including calipers, gauges, and micrometers.
• Ability to read, interpret, and follow specifications on Tech Cards and Process Control Procedures.
• Ability to lift and/or maneuver objects weighing thirty to fifty pounds and occasionally up to eighty pounds.
• Ability to work in difficult working conditions which may include exposure to noise, dust, chemicals, temperature extremes, awkward physical positions, and other elements for extended periods of time.

Training is provided on the job. Rework Analyst, Visual Dimensional and Penetrant Inspection Courses preferred. May be required to complete hazardous waste management training.

In compliance with applicable safety standards, certain tasks within this job position may require the use of a NIOSH-approved respirator. Respirator selection will be based on work performed, exposure information, duration of use, and other relevant factors. Facial hair or items that interfere with the respirator seal are not permitted where a tight-fitting respirator is required.

• Adhere to plant and department safety rules; safely operate all equipment and tools; identify and report safety problems.
• May be required to handle hazardous waste.
• Perform other tasks as directed.

PCC Structurals is committed to a diverse workforce. As an Equal Opportunity Employer, VEVRAA Federal Contractor, we provide equal opportunity to all persons regardless of race, religion, age, gender, disability, veteran status, national origin, color, or any other classification in accordance with federal, state, and local statutes. Veterans are encouraged to self-identify for priority referrals.

We comply with the Family Medical Leave Act (FMLA). For reasonable accommodation requests under the Rehabilitation Act, Vietnam Veterans’ Readjustment Act, and the Americans with Disabilities Act, applicants may contact us for assistance. Equal Employment Opportunity information is available c.gov