Optical Assembly Test Technician's; 1st Shift

Maxonic maintains a close and long-term relationship with our direct client. In support of their needs, we are looking for an Optical Assembly Test Technician's (1st Shift).

Optical Assembly Test Technician's (1st Shift)

Milpitas, CA

Onsite

Monday - Friday 6:30 AM to 3:30 PM (plus 2 hrs. OT daily) 10 Hrs.

$33/hr, Based on experience.

• Maintain test tooling, sending/receiving tooling to complete daily work activities (3rd party calibration)
• Performs the build, calibration, testing and troubleshooting of mechanical assemblies at a system level.
• Determines and may develop test specifications, methods and procedures from blueprints, drawings and diagrams.
• Tests and troubleshoots assemblies and/or final systems.
• May complete rework on assemblies and/or systems as a result of testing.
• Prepares technical reports summarizing findings and recommending solutions to technical problems.
• May assist in the selection and set-up of specialized test equipment.

• Typically requires a minimum of 2 - 4 years of related experience.
• Requires experience in testing digital and/or analog systems
• Ability to read complicated drawings, mathematics, handbook formulas, and a variety of testing and measuring instruments
• An AA degree, military technical training or their equivalent vocational training is required

• Must have a mechanical background
• Optical glass alignment experience (not looking for fibre optics)
• Optical alignment benches
• Doing mechanical assembly on a bench, align optics by shining laser lights
• Hands on alignment on tools, assembly experience
• Degree is not a hard requirement (preferred)
• No degree – 3 to 5 years of mechanical background experience
• Cleanroom job (95% of the job)
• Lifting up to 50 pounds (anything over 50 pounds requires 2 person or tools)

• Core Skill Requirements
• Mechanical Background (Most Important)
• Strong mechanical aptitude.
• Hands‑on experience using basic mechanical tools (e.g., calipers, hand tools).
• Experience with mechanical assembly, alignment work, or bench level work.
• Ability to troubleshoot mechanical issues.
• Optics Experience (Very Important but Specific)
• Experience with optical glass alignment (not fiber optics).
• Work involves:
  Shining laser light through optics to achieve alignment.
• Some troubleshooting throughout the alignment process.
• General Technical
  
  Skills:
  
  Basic software skills;
  Microsoft Excel and Word;
  Occasional oscilloscope use but not a primary requirement.
• Education Requirements:
  
  A degree is NOT required;
  Candidates without a degree should have 3–5 years of relevant hands on, mechanical/assembly experience.
• If the candidate has a degree:
  Mechanical engineering is most common on the team;
  Degree holders can be recent graduates, as long as they show some real‑world experience (projects, internships, hobbies, etc.).
• Other acceptable engineering backgrounds:
  Aerospace engineering;
  Automotive/mechanical tech backgrounds (shows hands‑on mechanical capability).

• Candidates should not have:
  Jumping from agency to agency.
• Very short‑term roles one after another.

• Stable work history demonstrating responsibility and reliability.

• Minor/recent gaps (a few months) are OK — not disqualifying.

• Job is 95% inside a clean room.
• Must be able to lift up to 50 lbs.
• Anything above 50 lbs requires a two‑person lift or proper tooling.

• Mechanical assembly on a workstation or bench.
• Optical alignment using lasers and precision tools.
• Troubleshooting when alignment or mechanical issues occur.
• Some weekend/overtime work is preferred, especially for new temps.
• Many team members volunteer for extra shifts for extra income.

• Mechanical assembly roles.
• Automotive mechanical work.
• Hands‑on engineering technician roles.
• Semiconductor equipment technicians (only if they troubleshoot tools—not just operate).
• Tesla or similar manufacturing experience has been successful in the past.

• Interview Duration: 2‑hour onsite interview total per candidate.
• Format:
  The hiring manager + another manager + 2 leads;
  Four 30‑minute interview rounds (one with each interviewer);
  Ideally run 4 candidates back‑to‑back during a 2‑hour block.

Since 2002 Maxonic has been at the forefront of connecting candidate strengths to client challenges. Our award winning, dedicated team of recruiting professionals are specialized by technology, are great listeners, and will seek to find a position that meets the long-term career needs of our candidates. We take pride in the over 10,000 candidates that we have placed, and the repeat business that we earn from our satisfied clients.

Please apply with your most current resume. Feel free to contact Manish Rajput ( / ) for more details.