Blender - 3rd Shift Job Mansfield area,Texas USA,Manufacturing / Production

Position Summary

Blend PTFE per extrusion

ESSENTIAL FUNCTIONS

Stage raw materials for blending operation on FIFO basis

Blend PTFE and Isopar to the specified instructions

Pour PTFE blends through screen into jugs, then weigh jugs

Enter all blends into WW3, place tags on jugs and brush off excess blend

Transfer jugs to the hot room and stage for extrusion

Transfer empty jugs to be cleaned

Wash jugs on a rotating basis

Change Isopar filters when needed

Unload PTFE from truck to cold room

Maintain work area in clean and orderly fashion, follow 5S practices

Know and practice all safety regulations and quality guidelines

Report production issues to Direct Lead

Perform work of an equal or lower classification

Perform related and other duties assigned by the Value Stream Team Lead.

DEPARTMENT SPECIFIC/NON-ESSENTIAL FUNCTIONS

Work safely in accordance with regulations, standards, and procedures, and in a manner that eliminates unreasonable risk to health and the environment. Notify management of unsafe conditions or practices, unlawful activities and activities which present unreasonable health and/or environmental risk. Report all safety and/or environmental incidents to management immediately.

Prevent excess waste of product and/or components by operating the equipment in an efficient manner.

Participate in peer-based teams (i.e., Natural High Performance Teams), and work with groups to initiate and implement programs such as Lean Manufacturing and 5-S.

Other duties may be assigned at a later time

MINIMUM REQUIREMENTS

Education required: High School diploma or GED
Experience: Production work preferred but not required. On the job training from 1 to 8 weeks or extend to 10 weeks if needed.
Preferred Skills/

Qualifications:
Good verbal and interpersonal communication skills.
Sound decision making skills.
Good math, reading, writing skills.
Be able to exercise continuous mental, visual, and audio attention.
Ability to work well in a team environment.
Skills/

Competencies:

1. Basic computer skills.
2. Ability to monitor machine sounds to identify and diagnose changes in order to take appropriate action.
3. Vision:
Near acuity and accommodation for reading information to perform job tasks.
4. Requires constant alertness to surroundings and product quality with attention to detail.
Physical Requirements:
- Lift/Carry up to 10 lbs:
  Occasional (1‑33%)
- 11‑20 lbs:
  Occasional (1‑33%)
- 21‑50 lbs:
  Occasional (1‑33%)
- Bending:
  Occasional (1‑33%)
- Twist/Turn:
  Occasional (1‑33%)
- Reach Below Knee:
  Occasional (1‑33%)
- Push/Pull:
  Occasional (1‑33%)
- Squat/Kneel:
  Occasional (1‑33%)
- Stand/Walk:
  Occasional (1‑33%)
- Sit:
  Occasional (1‑33%)
- Lifting Above Shoulders:
  Occasional (1‑33%)
Other

Skills:
- Ability to work well in a team environment
- Promotes a positive attitude
Assessment: Employee must pass Pre‑employment screening

ORGANIZATIONAL RELATIONSHIPS/SCOPE

Report directly to Value Stream Team Leader
Work closely with Maintenance to resolve issues with the equipment

WORKING CONDITIONS

The employee may be subject to:

High noise levels from operating machines and equipment.
Physical hazards from operating machines and moving reels.
Extreme temperature (Cold Room)

Work in areas where safety equipment will be required (steel toe shoes, eye protection, hearing protection)

Standing is required for extended periods of time. Walking, pushing, pulling, reaching, bending, turning, twisting, squatting, and lifting is performed on a regular basis

Requires high degree of manual dexterity, which could be performed under restrictive conditions

Requires flexible hours and short notice for overtime.

The employee may be required to follow other job‑related instructions and to perform other job‑related duties as requested, subject to all applicable state and federal laws.

DISCLAIMER

The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position.

Company Overview:
Parker Hannifin - Parflex Division

When you join Parker Hannifin's Parflex Division, you're not just working on hoses…


Increase/decrease your Search Radius (miles)



Job Posting Language