Fitter, Welder ​/ MIG​/MAG​/TIG

Location: Gray

POSITION TITLE:

Fitter (Structural & Pipe) JOB CODE: FITR

DIVISION:
Onshore/Offshore/International

REPORTS TO:

Foreman/Supervisor/Superintendent

DEPARTMENT:
Onshore/Offshore/International

POSITION SUMMARY

The Fitter is responsible for cutting and fitting pipe or structural materials for welders.

ESSENTIAL DUTIES AND RESPONSIBILITIES

(This is a representative list of the duties the position may be asked to perform and is not intended to be all-inclusive.)

* Align parts using jacks, turnbuckles, wedges, drift pins, pry bars and hammers

* Mark reference points onto floor or face block and transpose them to workpiece

* Give directions to welder to build up low spots or short pieces with weld

* Straighten warped or bent parts using sledge, hand torch, straightening press or bulldozer

* Remove high spots and cut bevels using hand files, portable grinders and cutting torch

* Examine blueprints and plan sequence of operation, applying knowledge of geometry, effects of heat, weld shrinkage, machining and metal thickness

* Tack weld fitted parts together

* Position or tighten braces, jacks, clamps, ropes, bolt straps or bolt parts in position for welding

* Assemble and secure pipes, tubes, fittings and related equipment according to specifications by welding, brazing, cementing, soldering and threading joints

* Put all information on the pipe before cutting and transfer all item numbers onto cut sheet and carry over item numbers to drop pipe

* Ensure all numbers are clear and point to the right material when fabricating spool sheets

* Check measurements to assure they match with drawing and obtain approval from quality control department

* Inspect, examine and test installed systems and pipe lines using pressure gauges, hydrostatic testing, observation or other methods

* Plan pipe system layout, installation or repair according to specifications

* Read and understand blue prints and ISO's

* Obey and follow all safety rules and policies

* Wear all appropriate safety equipment (PPE)

* Perform all other duties as assigned by manager and/or supervisor

MINIMUM QUALIFICATIONS AND REQUIREMENTS

* High School diploma or equivalent education

* 1+ years of fitting experience in an industrial setting

* Basic written and verbal skills

* Must have the ability to perform work accurately

* Must be reliable and have good time management skills

* For new hires, must meet all Performance Energy Services employment qualifications in force at time of hiring, including successful completion of a background investigation and pre-employment drug screen

* For new hires, must successfully complete all required training by Performance Energy Services

PHYSICAL DEMANDS

* Stand - Frequently

* Sit - Occasionally

* Use Hands - Constantly

* Climb - Occasionally

* Kneel - Frequently

* Lift/Carry over - Frequently (up to 50 lbs.)

* Vision - Required (Must be able to pass vision exam per appropriate medical requirements)

* Hearing - Required (Must be able to pass an audio test per OSHA standards)

WORKING CONDITIONS

* Wet or Humid (non-weather) - Occasionally

* Working near moving mechanical parts - Frequently

* Working in high places - Occasionally

* Exposed to fumes or airborne particles - Constantly

* Exposed to toxic or caustic chemicals - Occasionally

* Outdoor weather conditions - Constantly

* Risk of electric shock - Frequently

* Work with explosives - None

* Risk of radiation - Occasionally

* Noise Level - Very Loud

ACKNOWLEDGMENT

I have reviewed and understand the above job description and believe it to be accurate and complete. I can successfully fulfill each duty or task. I also agree that management retains the right to change this job description at any time.

_________________________________ _____________________

Employee Printed Name Date

_________________________________ _____________________

Employee Signature Employee