CNC Operator

Responsibilities

• Observe due dates on orders and cut accordingly based on cut times, sheets available
• Update status on Odoo as progressed; request any files that are missing or need work
• Inspect sheets prior to cutting, look for holes or tears in material, discoloration, uneven scrape, stains, glue spots, torn or missing PSA
• Test sheets for good bond
• Toolpath jobs in EnRoute software as needed
• Save correctly toolpathed files; keep file system clean and organized
• Clean dust and debris from router beds between cutting sheets
• Blow off dust and debris from linear rails on routers using air gun between cutting sheets
• Clean and maintain routers according to schedule and as needed
• Keep desk area neat and clean, clear dust from computers, monitors, network gear
• Keep router trays and toolboxes neat and clean
• Regularly check router for loose bolts, screws, wired connections
• Check dust collector bins and bags daily; empty as needed
• Clear dust collector ducting according to schedule and as needed
• Check temperature and verify pressure in air compressor
• Check oil in air compressor; fill as needed
• Clear water from air lines, catches, and tank
• Leave clear notes for next shift as needed
• Experiment with tooling when possible, in order to get more efficient/cleaner results
• Keep scrap shelves organized; use scraps when cutting smaller jobs and as often as you can
• Remove unusable scrap from area and place in trash bin outside
• Keep work area clean; sweep up before end of shift
• Help blow off parts with air gun
• Other duties as requested by management