Nuclear Mechanical & Structural Systems Inspector; SHIPS Security Clearance

Position: NUCLEAR MECHANICAL & STRUCTURAL SYSTEMS INSPECTOR (SHIPS) with Security Clearance
Duties Help
* You will perform mechanical, piping, structural, pre-arrival and material condition assessment inspections, certification and acceptance of completed work reviews on nuclear reactor plant, refueling, and overhaul work.
* You will perform receipt inspection, pre-use inspection, and marking verification of naval nuclear material ensuring proper material control and traceability is maintained.
* You will perform weld joint in-process and acceptance inspections for nuclear welding and non-destructive tests.
* You will prepare Nuclear Deficiency reports to initiate and authorize rejection of workmanship, components, materials and procedures that do not meet specification.
* You will ensure reactor grade cleanliness is maintained in accordance with local directives as required by NAVSEA specifications for reactor plant cleanliness.
* You will ensure the safety and operational capabilities of nuclear reactor plant systems.
* You will maintain records of inspections performed, results of inspections, and corrective actions taken in accordance with local directives. Requirements Help Conditions of employment
* Must be a US Citizen.
* Must be determined suitable for federal employment.
* Must participate in the direct deposit pay program.
* New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
* Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
* Males born after 12-31-59 must be registered for Selective Service.
* Selectee may be required to successfully complete a probationary period.
* You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
* Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
* You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
* Overtime will be required.
* You will be required to successfully complete a pre-appointment physical examination. Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying.

Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible.

The Screen-out Element for this position is:
Ability to Inspect as a Nuclear Mechanical & Structural Systems Inspector (SHIPS) performing duties such as:
* Maintaining a highly sophisticated and complex nuclear reactor plant system in accordance with critical design requirements and specifications.
* Performing inspections and verifying that specifications are being followed, using knowledge of all nuclear trades.
* Testing temporary systems and equipment after completion of work for proper flow, pressure and leak free joints.
* Performing reactor refueling operations, weld joint in-process and acceptance inspections for nuclear welding and Non-Destructive Testing.
* Interpreting diagrams, specifications, drawings and interrelated procedure and technical requirements. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://(Use the "Apply for this Job" box below). https:// Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social).

Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that…