Beam Line Operator II

Responsibilities

• Sets up and runs beam line equipment including robot, plasma and automatic blaster. Understands each machine’s operation such as feed rates and three-dimensional models for programming to obtain required productivity and cosmetic standard for parts produced.
• Knowledge of difference in operation and adjustments needed in cutting one alloy and gauge of material versus another.
• Uses knowledge of difference in operation and adjustments needed in cutting one alloy and gauge of material versus another.
• Performs routine and regular maintenance for robot, plasma cutter and abrasive blaster. Includes machine operation diagnostic and trouble shooting.
• Downloads program and nesting as required.
• Verifies measurement of cut material.
• Accurately counts parts as needed.
• Uses forklift to transfer material.
• Moves material to next operation or storage area using overhead crane.
• Operates pencil grinders, disk grinders, cutoff wheels, hand drills, drill presses as needed.
• Ensures safe working practices are followed and a top priority.
• Performs work within acceptable quality and productivity standards.
• Uses basic measuring equipment such as tape measure, calipers, steel rules, etc. Verifies position of metal components in assembly, using straightedge, combination square, calipers, tape measure and rule.
• Applies a basic understanding of blueprints and tolerances that relate to assigned tasks.
• Maintains work area in a neat and organized manner. Keeps work area organized and as clean as possible while working and clean up all tooling, machinery and work area when finished with each job.
• Notifies direct supervisor of any equipment or tooling that is damaged or not working properly.
• Maintains accurate records of time and quantities, etc. If you know of incorrect time or quantity in folder, notify supervisor so it can be corrected.

• Other functions as assigned by supervisor or manufacturing management.

• Continuous carrying of parts under 10 pounds.
• Continuous standing on a concrete floor.
• Continuous use of near vision while operating and checking parts.
• Continuous fine finger movements on computer, crane remote and writing.
• Continuous pushing of carts and rollers.
• Frequent lifting and carrying of parts under 20 pounds.
• Frequent handling and gripping of parts and tools.
• Frequent reaching above and below shoulder.
• Frequent walking.
• Occasional pulling of carts and rollers.
• Occasional reading and writing.
• Occasional lifting up to 50 pounds.
• Work environment can be hot and humid in the summer with continuous manufacturing noise and dust.
• PPE required for position includes safety glasses, safety shoes, hearing protection, and gloves and other PPE as needed.
• Please refer to the physical demands analysis for additional details.

• One (1) year of manufacturing or machine operating experience.
• Some experience with the properties of ferrous and non-ferrous metals.
• Some maintenance and troubleshooting experience.

• Working knowledge of the practices, materials, methods, and metalworking and hand tools.
• Working knowledge of the hazards and safety precaution metal cutting.
• Skill in blueprint reading and keyboarding.
• Skill in the use and care of tools and equipment.
• Ability to understand and follow oral and written instructions.
• Good oral and written communications skills (English).
• Strong attention to detail skills.
• Overhead crane experience preferred (on the job training is provided).

• No current lifting restrictions prohibiting lifting up to 50 pounds.

• Pre-employment physical
• Pre-employment drug screen