Senior Inspector

is seeking to hire a Inspector Senior for our client in Irvine, CA!

Benefits Available!

Weekly Pay!

$40.25/Hour

With limited guidance in a team environment, responsible for various semi-complex inspection requirements.

• Maintain accurate and up-to-date acceptance and rejection records or certifications systems as required by the applicable specifications.
• Determine acceptance or rejection after inspection or calibration of parts, tools, instruments or x-ray film.
• Identify defective conditions and test failures and prepare all appropriate documentation or calibration history.
• INSPECTION Perform semi-complex inspection on detailed machined parts using a wide variety of measuring instruments to determine acceptability or rejections of parts or parts finish.
• Adapt and develop inspection set-ups to check sample parts, forgings and castings.
• Check tool and jig layouts.
• Perform first article and envelope inspection, source inspections, or semi-complex surface plate set-ups.
• Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection.
• Use mathematics to convert blueprint dimension and tolerances.
• Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer s requirements and military standards.
• Layout and measure hole locations and centerlines on castings, forgings, and machine parts to maintain control of machining cycle during manufacture.
• Determine acceptance or rejection after inspecting parts, tools, instruments or x-ray film.
• Identify causes of defective conditions and test failures and prepare all appropriate documentation.
• Investigate cause of customer return failures.
• Perform inspections to applicable specifications within assembly, test and shipping departments.
• Assist customer or government source inspectors as necessary.
• CALIBRATION Perform calibration on various types of semi-complex measuring and test equipment.
• Set-up calibration test conditions interpreting calibration procedures, specifications, manufacturing instructions or related documents.
• Document and evaluate historical data to determine calibration intervals.
• Diagnose and calibrate newly acquired equipment.
• NONDESTRUCTIVE TEST Perform daily, weekly and monthly equipment and material checks.
• Perform pre-inspection and post-inspection cleaning.
• Set-up equipment and conduct tests of a semi-complex scope.
• Perform complete inspections in accordance with the applicable specifications, standards and other contractual documents.
• Interpret, evaluate and document inspection results in accordance with approved procedures.
• Observe all prescribed safety rules and regulations and maintain a FOD free work area.
• Perform other related responsibilities.

• Three years related inspection, calibration, or NDT experience or demonstrated ability to perform described responsibilities.
• May be required to be certified as a Level II Nondestructive Test Inspector in two or more disciplines.
• Certification must be in accordance with MIL-STD-410 and PES1-29.
• Preferred experience of CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5.
• Knowledge of applicable military standards or specifications required.
• Proficient in reading and interpreting blueprints, customer s specifications and internal drawings and procedures.
• Possess working knowledge of shop mathematics including trigonometry.