Fabricator Welders MIG - TIG

Welding Fabrication Role

Fulcrum Engineering & Technical are acting as an Employment Business on behalf of our Clients. We are recruiting personnel at all levels for similar Welding Fabrication roles based on skill sets & experience. Fabricator Welders will be more involved with fabrication work plus higher spec welding work with TIG.

Sheet Metal Fabricator Welders & Welder Fabs working on the fabrication from engineering drawings & welding angle, box, tube to high spec finish. Welders TIG mainly working on welding sheet metal 1.5-4 mm stainless or mild steel, ali, mild steel angle, box; ideally able to weld pipe & tube with TIG or MIG.

Also semi-skilled applicants can apply if they can cover most of the work depending on their skill set.

Quals/

Skills:

Able to fabricate & weld with TIG mainly & some MIG depending on skill levels, or weld with MIG and some TIG. Ideally C & G or NVQ Welding Fabrication or Sheet Metalwork. Ideally use Tube Bending Machine, Press Brake & other workshop machinery & tools.

Hours:

07:00-16:30 or 17:30, 40-50 hours Mon to Fri as required; also 06:00 or 07:00-13:30 Sat as required. Term:
Temp to Perm 13 weeks with good chance of perm role after 13 full weeks. Perm:
May be some direct perm roles if the applicant is working and has to give notice.

Temporary

Contract:

£16.50 per hour up to 40 hrs; £24.75 per hour Overtime & Sat depending on skills/qualifications. Pay review after 13 full weeks with good chance of increase of £1 per hour on top of rates.