Aircraft Mechanic Sheetmetal - A&P or FCC - Mannheim​/Germany

The Aircraft Mechanic 2 - Sheet metal/Structures

Performs and inspects aviation unit (AVUM), intermediate (AVIM), and depot maintenance on assigned aircraft.

• Assemble structural parts and components to meet requirements.
• Perform structural repair, modification, and corrosion protection treatment with respect to original strength, weight, and contour to maintain structural integrity.
• Assemble repairs using special fasteners and adhesives.
• Use jigs, fixtures, forms, and molds.
• Use metalworking equipment and tools to form, cut, bend, and fasten replacement or repair parts to damaged structures and components.
• Inspect and troubleshoot to determine cause of malfunctions; disassemble to point of trouble; adjust, repair, realign, fabricate, or replace defective components or assemblies.
• Incorporate authorized modifications and changes.
• Maintain and inspect tools and equipment.
• Assess damage to aircraft structural components.
• Check repairs for serviceability according to specifications and technical publications.
• Treat corrosion using mechanical and chemical procedures.
• Store, handle, and dispose of hazardous waste and materials according to environmental standards.
• Post entries and maintain maintenance and inspection records.
• Input, validate, and analyze data processed to automated systems; clear and close out completed maintenance discrepancies in automated maintenance systems.
• Recommend methods to improve equipment performance and maintenance procedures.
• Prepare forms and records related to aircraft maintenance.
• Perform additional duties as required.
• Perform other qualified duties as assigned.

• High School Graduate or equivalent is required.
• Five (5) years of recent applicable aircraft maintenance experience is required.
• FAA A&P OR FCC Elements 1 and 3 Required.
• FAA (A&P) required, with at least Two (2) years aviation maintenance experience, and Two (2) years on the assigned MDS (UH-60/CH-47/AH-64).
• Experience with Rotor Blade (inspection and repair) preferred.
• All experience must be within the Five (5) most recent years.
• If No A&P, must possess an FCC License with Elements 1 and 3 and Three (3) years aviation maintenance experience, Three (3) years rotary wing aircraft experience and two (2) years on the assigned (UH-60/CH-47/AH-64) Mission Design Series (MDS).
• If willing and able to obtain an FCC License, discuss with Recruiter.
• Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. US Citizenship is required to obtain a T1/CAC NACI Clearance.
• Interim NACI approval required for deployment.
• Valid US Passport Required for deployment to Germany.

• TESA Approval: (German Govt) Must be able to qualify for TESA approval; with 5 years career total Aviation maintenance experience.
• Travel:
  As required in support of task order.

• Possess the level of experience necessary to inspect, replace, modify, or repair all required aeronautical type maintenance to be performed on structural, mechanical, and electrical systems assigned.
• Must have skill in reading, applying, and interpreting technical data including schematics and engineering drawings.
• Able to properly use a variety of common hand tools and measuring devices such as gauges, torque wrenches, scales, and TMDE (test measurement and diagnostic equipment) related to specific aircraft models.
• Knowledge of aircraft construction features; identification and characteristics of aerospace materials; repair of metal, plastic, fiberglass, bonded honeycomb, and composite structural components; shop drawing and sheet metal layout techniques; shop mathematics; corrosion identification, removal, repair, and prevention; cleaning of metals; application of protective coatings; proper use, handling, and disposal of hazardous waste and materials.
• Able to provide technical assistance to customer in regards to aircraft structural maintenance.
• Knowledge of quality, production, and supply processes required to perform job assignment.
• Experience operating basic sheet metal shop equipment: band saw, drill press, belt sander, shrinker/stretcher, floor shear, sheet metal brake, pan and box brake.