Forklift Spotter - STRU

** Traffic Control & Spotting
*** Establish and maintain safe clearances for forklifts, telehandlers, and pallet jacks
* Use standardized hand signals and radio communication to guide operators
* Control pedestrian flow; place cones/barriers and post “No Walk” zones
* Maintain line-of-fire awareness around pinch points, blind corners, docks, and racking.
** Pre-Task Planning
*** Perform Job Hazard Analyses (JHAs) and pre-lift briefs for oversized/awkward loads
* Verify load stability, height/width/center of gravity, and travel path conditions
* Confirm forks/attachments and route are appropriate before movement.
** Area Readiness & Housekeeping
*** Keep aisles, intersections, dock plates, and staging zones clear and marked
* Support 5S standards; promptly address debris, spills, and tripping hazards.
** Communication & Documentation
*** Coordinate with operators, leads, and receiving/shipping to sequence moves
* Report hazards, near misses, and incidents immediately; assist with investigations
* Complete daily spotter checklists and help maintain visual controls/signage.
** Safety & Compliance
**** Support Tasks (as needed)
*** Assist with load staging, tag/label verification, and basic rigging checks.
* May escort wide/long loads between cells or buildings.

Note:

This role
** does not require
** operating a forklift; however, cross-training or certification to operate may be requested depending on business needs.

** Qualifications
* ** Experience in a manufacturing, distribution, or construction environment preferred
* Familiarity with PIT operations and
** standard hand signals**; strong radio etiquette
* Working knowledge of shop floor safety (JHAs, line-of-fire, barricading, 5S)
* Clear, assertive communicator who can pause work and escalate when needed.
* Detail-driven, calm under pressure, and team-oriented.
* Preferred* Prior spotter/flagger experience or OSHA PIT awareness training
* First Aid/CPR certification.
* Bilingual English/Spanish is a plus.
** Schedule & Environment
*** On-site role; multiple shifts may be available (OT as needed).
* Manufacturing floor with active PIT traffic, variable noise, and changing layouts.
* Physical Demands & Work Environment (JD version)
Role Summary  The
** Forklift Spotter
** is a critical safety role responsible for guiding powered industrial truck (PIT) movements to protect pedestrians, equipment, and product. You’ll control the work area, direct drivers using approved hand signals/radios, and maintain line-of-fire awareness so material moves safely and efficiently.

Key Responsibilities
* Enforce PPE and mobile-phone-free zones within controlled areas
* Follow EAS procedures and OSHA 29 CFR  (PIT) requirements
* Participate in safety talks, refreshers, and emergency drills.
#J-18808-Ljbffr