Line Mechanic C-
Job in
Hazard, Perry County, Kentucky, 41771, USA
Listing for:
AEP
Full Time
position
Listed on 2026-02-01
Job specializations:
-
Trades / Skilled Labor
Heavy Equipment Mechanic, Maintenance Technician / Mechanic
Salary/Wage Range or Industry Benchmark: 60000 - 80000 USD Yearly
USD
60000.00
80000.00
YEAR
Job Description & How to Apply Below
Position: Line Mechanic C-A
Please note the job posting will close on the day before the posting end date.
Job Summary Perform work involved with the installation, rearrangement, maintenance, operation, removal, and inspection of electrical transmission and distribution facilities, drive and operate line trucks and associated auxiliary equipment. All duties apply to overhead and underground equipment and facilities. The Line Mechanic C builds upon the skills, abilities and knowledge learned as a Line Mechanic D (or equivalent).
Job Description The selected candidate will need to reside within 45 minutes of the Hazard Service Center (1400
E. Main Street, Hazard KY 41701).
Line Mechanic C
ESSENTIAL JOB FUNCTIONS:
Assemble, install, maintain, remove and inspect overhead and underground facilities including conductors, cables, transformers, fixtures, structures and other associated equipment under supervision as skill level dictates.After completion of C-100, or equivalent experience, perform work on conductors and equipment energized up to 260 volts under general supervision. Assist with work on conductors and equipment energized at secondary voltages to 600 volts under immediate supervision of higher classification.After completion of C-100, test, de-energize and ground URD cable, splice and terminate URD cable, and troubleshoot, repair and energize URD cable and equipment under supervision as skill level dictates.After completion of C-200, or equivalent experience, work on conductors and equipment energized up to 600 volts under general supervision. Use electrical test equipment such as volt meters, amp meters, ground meggers and continuity testers.After completion of C-200, may cover stationary tied-in primary conductors and equipment under direct supervision as skill level dictates.After completion of C-300, may cover up, transfer or move primary conductors and equipment under direct supervision as skill level dictates.During the first twelve months, perform duties consistent with B classification and progress from direct supervision to immediate supervision as skill level dictates.2. Build and erect equipment mountings (such as regulator and transformer platforms) and build overhead transformer installations.
3. Conduct proper tagging procedures while performing switching of energized circuits.
4. Perform inspection and troubleshooting of lines.
5. Perform similar or less skilled work as assigned.
6. Direct the work of employees assigned to assist.
7. Complete Monthly Apprentice Cards and submit to local supervision for review. The guideline below is provided to assist in safety and development of employees and is not intended to limit work assignments:
• DIRECT SUPERVISION – When a qualified person is hands-on with the task.
• IMMEDIATE SUPERVISION – When a qualified person is near the structure/equipment and in constant contact.
• GENERAL SUPERVISION – Higher-classification employee who is knowledgeable of the task.
• QUALIFIED PERSON – Line Mechanic or Supervisor capable of emergency rescue.
MINIMUM REQUIREMENTS:
Education:
High school diploma or GEDExperience:
Minimum of one year distribution electrical power line work experience, OR one year of related line experience as defined by the company (see original posting for details).Licenses/Certifications:
Valid Class A CDL is requiredOTHER REQUIREMENTS:
Shall have performed the duties of and have all qualifications of Line Mechanic D or the equivalent and qualify through demonstration, examination and/or performance appraisal as determined by the Company.Must have the ability and desire to acquire the knowledge and skills to perform the duties of the Line Mechanic A within the company’s framework.Must acquire within the time frame determined by the Company the qualifications to perform duties of the next higher classification or vacate the current job classification.A physical abilities assessment is required for this position.Line Mechanic B
ESSENTIAL JOB FUNCTIONS:
Assemble, install, maintain, remove and inspect conductors, fixtures and other equipment on overhead and underground facilities.During the first twelve months, assist with work on energized lines and equipment and…
To View & Apply for jobs on this site that accept applications from your location or country, tap the button below to make a Search.
(If this job is in fact in your jurisdiction, then you may be using a Proxy or VPN to access this site, and to progress further, you should change your connectivity to another mobile device or PC).
Search for further Jobs Here:
