Machine Operator

Greensboro
3240 N Ohenry Blvd
Greensboro, NC 27405, USA

Reports To: Reporting structure identified on facility organizational chart

FLSA Status: Non-exempt

Reviewed/Revised By: Kathy Speier

Reviewed/Revised Date: November 2018

Start up, adjust and operate machines used in production lines to ensure proper and efficient operation and production with minimal disruption. An incumbent may or may not perform all of the duties listed below, dependent on the specific plant for which support is provided.

Essential Functions:

• Start up production machines; periodically check to insure machine set points are accurate.
• Ensure proper operation of machines; clean filters, perform minor maintenance, and monitor while purging.
• Insure proper sleeves, boxes, labels and materials are used for the line running (verify by part numbers).
• Conduct quality inspections while line is running; check samples for compliance to specifications.
• Respond to problems on the line making proper adjustments to machines.
• Notify supervisor when repairs and maintenance are required.
• Re-start machines after maintenance is completed.
• Prepare paperwork/documentation on problems, cause and solutions.
• Record production and/or quality data (manual/data collector). Close out production run.
• Keep area clean and free of debris, enforce all safety and housekeeping policies and practices.
• Assist with training other Technician Operators on various aspects of the job.
• Provide relief for breaks and lunches.
• Perform other related duties and special projects.

Marginal Functions:

• May make boxes, pack and/or test various products.
• May attach labels to products.

Supervisory Functions:

None

Education: Requires a high school education or equivalent plus mechanical training/aptitude and technical training on packaging, plastics and printing equipment.

Experience: Requires a minimum of 1 to 3 years experience operating machines used in the packaging/plastics industry in order to gain sufficient skill to perform the requirements of the position.

Skills and Abilities
, which may be representative but not all inclusive of those commonly associated with this position:

• Language:
  Perform reading, writing and speaking at a basic level.
• Mathematical:
  Competent in practical application of arithmetic, algebra, geometry and trigonometry; add, subtract, multiply and divide all units of measure; calculate fractions, percentages, ratio and proportion, variables and formulas.
• Reasoning:
  Ability to apply rational principles to solve practical problems and deal with several concrete variables in standardized situations and to interpret a variety of instructions furnished in written, oral, diagram or schedule form.
• Computer skills at a basic to intermediate level, including use of CNC machines.

Machines, Tools, Equipment, Software and Work Aids
, which may be representative but not all inclusive of those commonly associated with this position:

Mechanics tools, calipers, gauges, weight scales, extrusion blow mold machine, extrusion machine, injection mold machine, injection blow mold machine, lining machine, label machine, pad printer, silk-screen.

Physical/Visual Activities or Demands: Physical/visual activities or demands that are commonly associated with the performance of the functions of this job.

• Standing, walking, bending, lifting, moving, talking, hearing, pushing, carrying, reaching, and grasping.
• Flow of work and character of duties involve normal mental and visual attention along with manual coordination; or part time concentrated attention and coordination.
• Clarity of vision at 20 inches or less and 20 feet or more, the ability to bring objects into sharp focus, to judge distance and space relationships and to identify and distinguish colors.
• Light to medium work – exert up to 50 pounds of force continuously and up to 50 pounds of force frequently to lift, carry, push, pull or otherwise move objects.

Work

Conditions:

Environmental and atmospheric conditions commonly associated with the performance of the functions of this job.

Physical conditions include proximity to moving mechanical parts and exposure to noise, dust, high temperatures,…