Welder

Work Schedule

Days and hours vary depending on the assigned project.

• Promote and comply with all Company and safety policies and procedures
• Weld components in flat, vertical, or overhead positions.
• Weld components in flat, vertical, or overhead positions.
• Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
• Clamp, hold, tack-weld, heat-bend, grind and/or bolt component parts to obtain required configurations and positions for welding.
• Detect faulty operation of equipment and/or defective materials and notify supervisors.
• Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
• Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Examine work pieces for defects, and measure work pieces with straightedges or templates to ensure conformance with specifications.
• Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
• Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
• Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
• Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
• Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
• Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
• Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications, or types and thicknesses of metals.
• Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
• Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
• Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
• Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
• Fill holes and increase the size of metal parts.
• Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
• Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
• Signal crane operators to move large work pieces.
• Guide and direct flames or electrodes on or across work pieces to straighten, bend, melt, or build up metal.
• Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
• Cut metal plates and structural shapes to dimensions, and contour and bevel as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
• Preheat work pieces prior to welding or bending, using torches or heating furnaces.
• Use fire suppression methods in industrial emergencies.
• Set up and use ladders and scaffolding as necessary to complete work.
• Join parts such as beams and steel reinforcing rods in buildings, bridges, and highways, bolting and riveting as necessary.
• Hammer out bulges or bends in metal work pieces.
• Maintain a professional appearance
• Other duties as assigned by Foreman or Superintendent

• High school diploma or equivalent GED.

• Minimum of 6 months experience, one year certificate from a technical school or an equivalent combination of education and experience