Industrial Maintenance Tech

Overview

The Maintenance Technician III is responsible for performing all related tasks necessary to repair, upgrade and maintain the facility, equipment and grounds. Provide technical advice and recommendations for facility and equipment repairs, modifications and installations (i.e., Feasibility, Design, Layout & Cost). Provide 24 hour on-call service 26 weeks per year.

• Comprehends and follows applicable departmental and corporate procedures and assists with development of new procedures that are related to an industrial maintenance environment.
• Knowledgeable and complies with requirements for G.M.P.s, F.D.A., U.S.D.A., O.S.H.A., E.P.A. and I.S.O. as related to maintenance functions in industrial environment.
• Familiar with and understands local and state code requirements for electrical, mechanical and plumbing compliance.
• Perform facility and equipment preventive maintenance including data entry and assistance in the revision of PMs being performed by maintenance and equipment operators.
• Troubleshoot equipment and facility problems, perform necessary repairs when feasible and/or recommend alternatives such as outsourcing.
• Obtain installation and repair quotes for outside services, recommend vendors and coordinate service through completion.
• Assist with maintenance projects and coordinate projects that best utilize their technical skills and abilities.
• Develop vendor contacts for purchasing specialized parts or services and can offer technical information as needed.
• Must be available for on-call rotation with a response time of 1 hour.
• Any tasks deemed reasonable by supervisor.
• Act as a backup for the Facilities Manager, as required.

• Heavy lifting and maneuvering of over 100 lbs.
• Standing, bending, kneeling, sitting, climbing, walking and carrying for extended periods.
• Precise manipulation of objects using fingers, hands, wrist and shoulders.
• Working in temperatures ranging from
  -5 to 115 degrees (F) for extended periods.
• No vertigo or claustrophobic conditions.
• Non-sensitivity with maintenance cleaning solvents and chemicals.

• High school diploma or educational equivalent.
• Minimum of 3 years hands-on maintenance experience in a manufacturing environment.
• Experience in facility maintenance areas including electrical, plumbing and HVAC; PLC experience is beneficial.
• Accurate with mechanical/electrical mathematical calculations and can read and interpret electrical and mechanical schematics.
• Proficient with personal computer operations; SAP experience is beneficial.
• Experienced in dealing with subcontractors.
• Valid Georgia driver’s license.

USA GA - Grayson