Senior Machinist

Overview

Location: Fresno, CA
FLSA Status: Non-Exempt / Hourly
Compensation: $ (Compensation is based on years of relevant experience and skillset level.)

Trillium Flow Technologies is seeking a skilled Machinist III/IV (Advanced) to support machining operations within our Fresno Machine Shop. Under the direction of the Machine Shop Supervisor, this role is responsible for setting up and operating a variety of machine tools to manufacture, modify, and repair pump components. This position requires strong machining fundamentals, the ability to work from complex drawings, and a commitment to quality, safety, and continuous improvement.

• Set up and operate engine lathes, vertical turret lathes (VTL), mills, radial drill presses, and related special-purpose machine tools, with or without the use of D.R.O. or other computer-enhanced equipment
• Demonstrate proficiency in a minimum of two to three work cells (machines), based on operational needs
• Plan and perform machining operations for the construction, alteration, and repair of products, jigs, fixtures, and equipment
• Accurately interpret complex drawings, sketches, and specifications
• Machine parts with little to no quality defects and proactively identify potential issues that may impact quality
• Detect and report faulty operations, defective materials, equipment malfunctions, and other unusual conditions to the appropriate Supervisor or Lead
• Select, install, and replace cutting tools, drills, taps, grinding tools, blades, sanding belts, and discs as required
• Deburr and inspect all parts prior to moving them to the next operation or to Quality Control for final inspection
• Maintain a safe, clean, and organized work area in accordance with safety and housekeeping standards
• Complete timekeeping, production, and operational reports or enter required information into designated systems
• Comply with all safety requirements and ISO 9001/14001 quality and environmental standards
• Perform other duties as assigned

• High School diploma or equivalent
• 4–6 years of experience as a Machinist in a manufacturing or repair environment
• Technical machinist certification or equivalent hands-on experience
• Intermediate to advanced knowledge of metals and machining processes
• Strong blueprint reading and interpretation skills
• Proficiency using precision measuring tools and inspection equipment

• Hands-on experience with manual lathes
• Hands-on experience with Vertical Turret Lathes (VTL)

• Requires frequent lifting, pushing, or pulling of heavy objects over 50 pounds.
• Involves moderate risks or discomforts such as working around moving parts and rotating equipment.
• Routine use of personal protective equipment (PPE) is required, including safety glasses, steel-toed shoes, and ear plugs.
• Must adhere to all safety precautions and company policies.