Hole Cut Saw Operator

Overview

Our hand-crafted Spas and Swim Spas are made and tested to the highest quality standard and that quality starts with our team members in production. Each employee on the production line is asked to perform a variety of duties in a variety of departments, as cross-training is key to our continued success. You will need to follow the Work Order Instructions & Procedures in place in the department assigned to ensure production of a quality product at all times.

All departments are required to work together as a team, so it is crucial that this person be dependable and able to work well with others.

• Operate in the Holecut area using pneumatic drills with appropriate hole saws to drill spa shells for jets, lights, suctions, and top-side controls; sand the back side of holes after drilling and check for proper fiberglass thickness.
• Receive respirator clearance (Holecut area requires the use of a full-face respirator and Tyvek suit at all times while in the department).
• Gauging and minor repairs of fiberglass and acrylic on spas.
• Gauging and minor repairs of fiberglass and acrylic on spas.
• Read, understand, and evaluate work processes and drawings.
• Utilize knowledge of basic hand tools.
• Complete light paperwork/inventory as required.

• Must be able to lift, push and pull up to 100 lbs. with assistance (e.g., squat/thrust).
• Must be manually dexterous.
• Must be capable of working extended periods standing, sitting, squatting, and bending.
• Must always follow all safety policies.
• Must maintain daily cleanliness of the department.
• Ability to work in all environments, including outdoors and non-temperature-controlled manufacturing facilities and/or warehouses.
• Must be able to work in a facility that manufactures and/or handles various chemicals and materials such as fiberglass, resin, plastic, dust, glue, primer, foam, etc.

Full Time

Mon-Thurs 6:00am-4:00pm, possible overtime as assigned.

$18.50 per hour to start