Composite Fabricator C

Position: Composite Fabricator C – 90204
* Fabricate, assemble, rework, repair, and finish a variety of non-metallic parts, tools, and assemblies to specifications using methods such as layup, foaming, bonding, molding, and drap forming.
* Operate mixers, impregnating equipment, heat treaters, curing equipment, formers, presses, and ovens according to established procedures, as well as various cutting equipment for flat pattern cuts of composite materials.
* Collaborate with Manufacturing and Engineering to provide input on design optimization for developmental and emergent projects.
* Utilize prints, charts, change notices, sketches, work orders, and engineering drawings to complete work assignments effectively.
* Impregnate materials and cut fabrics to size using appropriate tools such as knives and shears.
* Hand and machine finish parts to required tolerances, ensuring proper fit within completed assemblies.
* Sand and polish molds to achieve smooth surfaces and wrap mandrels with impregnated materials to meet specifications.
* Place vacuum bags over wrapped parts, test for leaks, and seal any identified leaks in pressure and vacuum bags.
* Prepare and apply protective materials, lacquers, and parting agents to molds, forms, and dies.
* Load, unload, and operate ovens, presses, and pressure bags during the curing process of parts and assemblies.
* Drill, trim, seal, part-mark, sand, and edge break parts to meet production requirements.
* Select and secure appropriate tools, fixtures, and equipment to accomplish assigned work.
* Use shop mathematics and precision measuring instruments to ensure accuracy in work assignments.
* Perform Total Preventive Maintenance (TPM) on equipment, including cleaning, oiling, greasing, and changing filters to maintain optimal operation.
* Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
* Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
* Work in environments that may involve contact with metals, solvents, and coolants.
* Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
* Adapt to varying noise levels and atmospheric conditions.
* Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
* 3 months or more reading and interpreting engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
* 3 months or more with structure materials and processes including metals, composites, bonded and bolted joints.
* 3 months or more experience accessing a database for details work instructions.
* 3 months or more experience using precision measuring tools (i.e. micrometers, calipers, depth gauges, etc.).
* 3 months or more experience in composite fabrication.
* Must be able to lift, push, pull up to 35 pounds frequently within an 8 hour shift.
* Must be able to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
* Comfortable working from high/exposed places, tight spaces and working from ladders.
* Ability to work in noisy environments while completing tasks.
#J-18808-Ljbffr