MEP - Quality Inspector

Description

Job Description

• Responsible for incoming material inspections against the approved submittals and record the conformity level during incoming inspections against the approved submittal.
• Responsible for analysis & reporting of non conformity at site level.
• Responsible for document data & record control at site level.
• Responsible for verifying inspection requests and conducting pre and post‑inspection along with engineers/consultants and following up open comments of consultants for effective closure.
• Responsible for holding the work in case of no approved drawings and mockup approvals.
• Verification of incoming material against the approved submittal criteria to ensure conformity on inbound materials.
• Check the project quality compliance prior to the consultant visit and ensure the pre‑inspection checklist is adequately maintained and signed by supervisors/engineers/QA engineers.
• Conduct regular inspections at site level along with the consultant and communicate the comments during coordination meetings on a weekly basis.
• Coordinate with project engineers and clear non‑conforming work executed and record the follow‑up status.
• Regular visits to site work area and verify the acceptance criteria and report compliance/non‑compliances with photos and observations.
• Daily reporting of site quality violations to QA Manager/GM, escape customer complaints and open NCRs (pending for 7 days and more).

• Responsible for incoming material inspections against the approved submittals and record the conformity level during incoming inspections against the approved submittal.
• Responsible for analysis & reporting of non conformity at site level.
• Responsible for document data & record control at site level.
• Responsible for verifying inspection requests and conducting pre and post‑inspection along with engineers/consultants and following up open comments of consultants for effective closure.
• Responsible for holding the work in case of no approved drawings and mockup approvals.
• Verification of incoming material against the approved submittal criteria to ensure conformity on inbound materials.
• Check the project quality compliance prior to the consultant visit and ensure the pre‑inspection checklist is adequately maintained and signed by supervisors/engineers/QA engineers.
• Conduct regular inspections at site level along with the consultant and communicate the comments during coordination meetings on a weekly basis.
• Coordinate with project engineers and clear non‑conforming work executed and record the follow‑up status.
• Regular visits to site work area and verify the acceptance criteria and report compliance/non‑compliances with photos and observations.
• Daily reporting of site quality violations to QA Manager/GM, escape customer complaints and open NCRs (pending for 7 days and more).

• Knowledgeable and familiar in performing Pre‑Inspection for the Incoming Materials.
• Knowledgeable in analysing and reporting non‑conformities at site level.
• Knowledgeable in Work Pre‑Inspection and confirms that works are ready for consultant inspection.
• Ensures that works being carried out on site are as per the approved method statement.
• Can perform site induction and training for all workers to ensure that workers are educated and familiar with the project requirements.
• Carry out actions to NCR that are being issued by the Consultant.
• Coordinate works at the site to ensure that the sequence of works is followed.

Minimum Experience (Years): 4 Maximum Experience (Years): 7