Traffic Engineer

Traffic Engineer Salary Range

$74,172.80 - $

$81,910.40 - $

This position performs traffic engineering functions in the management of the city’s transportation system.

• Directs the placement of vehicle counters to determine vehicle volume; uses computer software to retrieve and adjust data; uses engineering analysis to determine proper timing of traffic signals and programs traffic signals accordingly; makes field or remote adjustments to timings as needed.
• Prepares special studies and reports relative to the traffic engineering function; reviews traffic volume and traffic accident data; sketches collision diagrams based on accident records; observes field conditions and makes recommendations for short- and long-term roadway improvements.
• Reviews traffic signal, sign, and striping plans to ensure compliance with Manual on Uniform Traffic Control Devices (MUTCD) and Alabama Department of Transportation (ALDOT) requirements; checks proper signal head and placement, location of signal controllers, type and location of vehicle detection, signal timing, type and placement of street signs, and type and placement of pavement markers.
• Reviews new commercial development and residential subdivision plans; calculates peak hour trips and determines if traffic impact study is required; modeling traffic using computer software; meets with Planning staff and Planning Commission to answer questions and address concerns.
• Manages the Neighborhood Traffic Calming Program; communicates with the public regarding speeding complaints; directs the placement of traffic counters to measure vehicle speeds; evaluates data to determine if street is eligible for traffic calming measures; forward petitions for resident signatures; identifies locations to install traffic calming devices.
• Assists in management and operation of City’s Traffic Management Center.
• Designs and reviews traffic control plans used in detouring traffic in road construction zones; chooses detour routes and directs the placement of appropriate signage.
• Investigates complaints concerning traffic control devices and coordinates corrective actions.
• Communicates and consults with other city, county, and state officials regarding traffic rules and regulations.
• Performs related duties.

• Knowledge of relevant local, state, and federal regulations.
• Knowledge of traffic engineering principles and practices.
• Knowledge of traffic technology, including intelligent transportation systems.
• Knowledge of the Manual on Uniform Traffic Control Devices (MUTCD).
• Knowledge of traffic signal operations, design, and construction principles.
• Knowledge of roadway striping standards.
• Knowledge of traffic sign and signal standards.
• Knowledge of department and city policies and procedures.
• Knowledge of computer and job-related software programs.
• Skill in the development and review of traffic systems plans and related documents.
• Skill in developing traffic control plans.
• Skill in communicating with the public.
• Skill in oral and written communication.

The Traffic Engineering Manager/Public Works Director assigns work in terms of division goals and objectives; and reviews work through conferences, reports, and observation of division activities.

Guidelines include safety regulations, the Manual of Uniform Traffic Control Devices, AASHTO Policy on Geometric Designs of Highways and Streets, the ITE Transportation Engineering Handbook, ALDOT publications, the Signal Design Guide and Training Manual, the Roundabout Design Guide, standard drawings and specifications, the Highway Capacity Manual, the Trip General Manual, the city code of ordinances, Alabama bid laws, the Civil Services Act, and department and city policies and procedures.

These guidelines require judgment, selection, and interpretation in application.

• The work consists of varied traffic engineering and project management duties. The need to multi-task and coordinate activities with a variety of stakeholders contributes to the complexity of the position.
• The purpose of this position is to…