Roof Technician

Job Summary

At Academy Roofing & Sheet Metal Co, a Roof Technician is involved in all aspects of the roofing trade, from tear-off to repair and maintenance. Primary roofing systems installed include TPO, PVC, EPDM, SBS modified bitumen, and standing seam metal. A roof technician installs roof-related sheet metal including gutters and downspouts, gravel stop, drip edge, gable trim, and copings. The Roof Technician's duties may include, but are not limited to:

* Remove and install commercial roofing systems in a safe and efficient manner.

* Ensure that the project is completed according to Academy Roofing & Sheet Metal Co policies under the direction of the Project Foreman.

* Make sure that all work is completed as per code and as per customer requirements

* Keep the work area safe and maintain it with good housekeeping practices.

* Attend regular meetings to discuss the weekly schedule and stress the importance of jobsite safety.

Requirements / Qualifications

* Roofing field experience, formal education, or a combination of these desired.

* High school education or GED required.

* Knowledge of OSHA safety requirements and other job-related responsibilities; OSHA 10-Hour certification a plus.

* Current, valid driver's license is required.

* Pre-employment drug and job assessment screens are required.

* Must be capable of the strenuous activity required to tear off, carry, and dispose of roofing material.

* The work schedule is varied sometimes beginning work very early and working until late in the day. Working at night or on weekends may be necessary.

* Roofing work may require extensive travel.

* Job requires extensive bending, climbing, lifting, kneeling, pulling, pushing, sitting and standing for extended periods of time. Most tasks will take place on the roof and will require exposure to the cold, heat, rain, sun, wind, and various heights. Must be able to climb up a 60-foot ladder safely with three-point contact; must be able to lift up to 90 pounds and push up to 200 pounds.