MLCL Operator

Current job opportunities are posted here as they become available.

The MLCL Operator is responsible for operating the MLCL Tufting Machine or other machines if LCL is without tufting orders.

• Repair any quality problems, i.e., changing hooks, blades, and needles
• Make stitch and yarn adjustments if required for setting up the machine.
• Repair gauge part-related defects specific to the LCL tufting machine.
• Get weight check for quality checker when machine changes are made.
• Change and secure backing for machines.
• Responsible for making first quality carpet and notifying the supervisor of any quality problems.

Performance Expectations (if applicable):

• Lifting is required of cores weighing 20 lbs. 6 times per shift and cones of yarn weighing 10-12 lbs. 4-5 times per shift.
• Standing is continuous, estimated 5 hours per shift.
• Reaching is required to thread up the machine every 10-12 minutes while the machine is running.
• Stooping is required 6 times per shift for intervals of 10 seconds.
• Bending is required to thread up the machine every 10-12 minutes while the machine is running.
• Scissors must be used 10-20 times per shift.
• Snips must be used 10 times per shift.
• Must be able to distinguish colors and shade differences.
• Occasionally required to climb, balance, and kneel.

Experience/

Education Requirements:

• High school diploma or equivalent preferred.
• Must be able to read and write and do basic addition, subtraction, division, and multiplication.

Other Requirements:

• Overtime is required on occasion.
• All accidents must be reported immediately.
• Perform any other duties as assigned.
• Safety equipment must be worn as required.
• Report to management any quality, safety, or potential problems encountered while performing the job.
• Responsible for the quality and safety of his/her own output.