Coating Roll Up Operator

Job Summary

The purpose of the Coating Roll Up Operator is to be responsible for checking auto rollup machine to insure everything is functional.

• Check with inspector to see what products are to be run.
• Check core.
• Check auto strap machine and clean it.
• Assist inspector in putting the inspection package together.
• Roll and cut carpet to the proper length.
• Remove scrap from the machine.

• Lifting is required, a weight of 25 pounds 50 times per shift.
• Standing and walking approximately 8 hours per shift.
• Reaching is required approximately 75 times per shift.
• Stooping is required approximately 50 times per shift for approximately 10 second intervals.
• Bending is required approximately 50 times per shift.
• Must be able to use scissors.
• Must be able to use hand trucks.
• Must be able to distinguish colors and shades.

• High school diploma or equivalent preferred.
• Must be able to read and write and do basic addition, subtraction, division, and multiplication.
• Computer knowledge or data entry skills are a necessary part of the job.

• Overtime is required on occasion.
• All accidents must be reported immediately.
• Perform any other duties as assigned.
• Safety equipment must be worn as required and requirements must be followed for all areas.
• Report to management any quality, safety, or potential problems encountered while performing the job.
• Responsible for quality and safety of his/her own output.